Fix&Go Automatic" Kit - Alfa Romeo MiTo 2016 Owner's Handbook Manual

IMPORTANT
30) When turning the jack handle make sure
that it can turn freely without scraping your
hand against the ground. The moving
components of the jack ("worm screw" and
joints) can also cause injuries: avoid touching
them. If you come into contact with
lubricating grease, clean yourself
thoroughly.
31) Contact an Alfa Romeo Dealership as
soon as possible to have the correct
tightening of the wheel bolts checked.
120
"Fix&Go Automatic" KIT
123)
32) 33)
This is located in the boot. The kit also
contains a screwdriver and a tow hook.
The kit also contains:
bottle 4 fig. 107 containing sealant
and fitted with: filling tube 1 and
adhesive label 3 with the wording "Max.
80 km/h" to be placed in a clearly visible
position (e.g. on the dashboard) after
repairing the tyre;
compressor 2 complete with pressure
gauge and connectors;
an information leaflet, providing
instructions for using the kit correctly.
This booklet should be given to the
persons charged with handling the tyre
treated with this kit;
a pair of gloves located in the side
compartment of the compressor;
adaptors for inflating different
elements.
107
Versions with LPG system
The car does not have a spare wheel but a
tool box fig. 108 that contains the
"Fix&Go Automatic" kit, the tow hook and
a screwdriver.
108
TYRE REPAIRING AND PRESSURE
RESTORING PROCEDURE
Proceed as follows:
place the vehicle in a safe and suitable
area, engaging the parking brake. Take
A0K0516C
A0J0359C