Installation Of Usb Cable; Example Installation Of Vci Module - GDS VCI User Manual

User's Manual
The VCI should be secured in a safe location when operating the vehicle to avoid
interference with other vehicle equipment.

Installation of USB Cable

Some GDS features require using the USB cable instead of wireless LAN while communicating
between the Information Terminal and the VCI module.
While installing the USB cable to the VCI module, the USB cable must be tightly connected in order to
avoid communication loss.
When removing the USB cable, press the connector lock tab first, and then disconnect the cable.
WARNING
Figure 3. Example Installation of VCI module
17
Module: A-01-004 (p.04)