Installation Of Main Dlc Cable; Connect The Dlc Main Cable To The Obd-Ii Connector - GDS VCI User Manual

User's Manual
Hardware

Installation of Main DLC Cable

First, confirm the position of the Data link Connector (DLC).
The location of the Data Link Connector (DLC) may vary depending on the type of vehicle.
It is usually installed in the lower instrument panel, on the driver's side.
The DLC may be installed in the engine room. Check for the proper location on each vehicle.
Figure 1. Connect the DLC main Cable to the OBD-II Connector
Installation of VCI Module
and DLC Main Cable
14
Module: A–01-004 (p.01)