VSCOM NetCom 111 Quick Installation Manual page 3

Otherwise fill in values "IP address" through
"Name server". IP address is required, and must
be unique for the entire network. The Netmask
is also required;
Administrator (recommended).
Important: The
NetCom may result in a fixed IP-Address. It will
be the same for all connected devices. Then the
Wizard can not configure to a certain device. It
is best to connect several NetCom one by one,
configure them, connect the next and search for
that device.
5. D
EVICE AND
I
NSTALLATION
In the next phase of installation the Device
Manager installs driver software for configured
NetCom devices.
Device Manager will ask the user to confirm the
installation. This is normal, and not an error
message. Click on "Continue". Now Windows
will detect all the serial ports on the NetCom
servers.
Logo Test
Windows installs drivers for virtual Com ports.
Press "Next" and let the system find the best
driver software for the device. Finish the
installation by pressing "Finish".
consult your Network
default configuration
P
ORT
In some systems
6. V
ERIFY THE
Once the drivers are installed, the devices are
listed in the Device Manager. Here is a sample
view.
of
The NetCom devices install components in two
the
NetCom Ports in Device Manager
classes. The serial ports are installed as usual in
Ports, while the NetCom devices have a class of
their own: "VScom Virtual Com". Properties of
the entire class can be viewed by marking the
class name and pressing the right mouse button.
The Installation Wizard will pop up.
7. U
NINSTALLING THE
To uninstall the drivers, open "Start" à
"Control Panel" à "Add/Remove Programs",
and select the item "VScom drivers for virtual
serial ports". Click "Change/Remove" to
remove the drivers.
Uninstall NetCom Drivers
I
NSTALLATION
D
RIVERS