Getting Started; Installing The Battery - Kyocera Milan KX9B User Manual

1 G
ETTING

Installing the battery

Your Kyocera Milan KX9B/KX9C phone comes with
a removable lithium ion (LiIon) battery.
charge the battery before using the phone.
To install the battery:
Hold the phone face down.
1.
Toward the bottom of
2.
the phone there is a
recess to aid you in
opening the battery
door. Use your
fingernail to pull the
battery door away.
Place the battery in
3.
the phone casing with the
metal contacts toward the
bottom of the phone.
Place the battery door
4.
tabs in the openings near
the top of the phone.
Press the battery
5.
door until it
clicks into place.
Before you
Note:
remove the battery,
make sure the phone
is powered off.
User Guide for the Kyocera Milan KX9B/KX9C Phones
S
TARTED
Fully
Charging the battery
You must have at least a partial charge in the
battery to make or receive calls.
To charge the battery:
Connect the AC adapter to the jack on the
1.
bottom of the phone.
Plug the adapter into a
2.
wall outlet.
The battery icon in the upper-
right corner of the screen tells
you whether the phone is:
• Charging (the icon is
animated)
• Partially charged
• Fully charged
The battery will not charge if you use the
Note:
phone while it is connected to an AC adapter.
Recharging the battery
You can safely recharge the battery at any time,
even if it has a partial charge.
1