Safety And Maintenance Information; Safety Info - NEO Ion 3715Z User Manual

2. SAFETY AND MAINTENANCE INFORMATION

Safety info

Before operate this unit, please carefully read this users guide and keep if needed in
future. It's necessary to respect following rules.
The disposal of the device after lifecycle could damage the environment, need to take
it to special company for recycling or return to authorized dealer.
The products referred to in this manual conform to the Eur opean Community Direc-
tives and are therefore marked with CE logo.
Keep this device away from children and unauthorized users, the manufacturer will
not take responsibility for the damage due to any disregard of the information provid-
ed in this manual and wrong operation.
Before operate the device, pls make sure the fixture is in good housing, ensure pan
and tilt can rotate in its complete range.
Pls make sure minimal 0.5m distance need to kept between the fixture to any flam-
--0.5m
mable material.
The device can only run with 100-240v voltage, 50/60Hz power, don't connect to any
other wrong power. Disconnect the device from main power before open the shield or
maintenance.
The device is designed only for indoor usage, pls keep it away from moisture. Do not
expose the device under the sun or directly to any other lighting source.
Never look directly into the projecting lens when the fixture is power on, the light may
trigger epileptic seizures in photosensitive persons or persons with epilepsy. Espe-
cially at beam effect, extreme caution and observance of these safety instructions is
mandatory.
Don't put or install the device on a surface that subject to vibration
or bumps.
P. 4
Neo ION 3715Z - English version