Toshiba TCB-EXS21TLE Instruction Manual page 9

916_TCB-EXS21TLE_Book1.book 9 ページ ２００７年８月２１日 火曜日 午後３時２０分
STEP 3 Set the ON time and OFF time, and press the SET
button.
• Set the trigger time with the HH and MM buttons, and
press the SET button.
• When the SET button is pressed, the ON time
changes from blinking to lighting and, at the same
time, the OFF time starts blinking.
STEP 4 Set up programs in the same way.
• When the SET button is pressed, settings are
automatically arranged in the order of earliest time
first.
• If the SET button is pressed without any new settings
being made in the program, program
blinking again and settings can be changed.
• Similarly, if the SET button is pressed with the third
program set up, the first program starts blinking.
STEP 5 Press the PROGRAM button.
• Program settings are entered and the normal display
returns.
STEP 6 Set up programmed operation for other days of the week in the same way.
Programs that have already been set up can be copied into other days of the week. (Refer to page 13)
NOTE
• A "0:00" time setting is interpreted to mean 12:00 midnight.
• To cancel program settings during program setup (while "PG-1" or "PG-2"is blinking on the
display), hold down the CANCEL button for more than 2 seconds. The normal display
returns.
• If settings are canceled without pressing the PROGRAM button, settings are not entered.
OI-916-9-EG
starts
EG
9