Setting Errors - Toshiba TCB-EXS21TLE Instruction Manual

916_TCB-EXS21TLE_Book1.book 10 ページ ２００７年８月２１日 火曜日 午後３時２０分

Setting Errors

If "ERROR" is displayed (the
time using the following steps.
If Program Times Are the Same
STEP 1 Every time the SET button is pressed, ON time and OFF time of the error program switch alternately.
Select the program to be corrected.
STEP 2 Change the time setting with the HH and MM buttons.
STEP 3 Press the SET button and check "ERROR" is not displayed.
STEP 4 Press the PROGRAM button to end the setting mode.
The following ON time/OFF time settings generate an error.
1) When operating times overlap
Example:
2) When OFF time is earlier than ON time
Example:
3) When ON time and OFF time are equal
Example:
4) When only ON time or OFF time is set
Example:
10
indication blinks) while the programmed operation is set up, correct the set
0:00
0:00
0:00
0:00
23:59
ON OFF
ON OFF
23:59
OFF ON
23:59
ON OFF
23:59
ON
OI-916-10-EG