TECHVIEW QV-3162 User Manual page 59

1. Record Search
Record playback procedure
Firstly, select the date you want to check and tick 1 to 4 channels. Any record files in current
channel at current date will be displayed in the status bar of the interface.
Secondly, select record type (Normal record, Motion record) and channels, and then click
"
red part stands for motion record, green stands for normal record and original part stands for no
record during this period.
Before playback, choose to enable playback 4 channels synchronously. If you tick-select
"
otherwise, you could separately control the channels playback.
Thirdly, start playback
Click to start record playback. When mouse curse is moving on the time axis, the time point
of current position will be displayed on the time axis screen. Click to locate the record. Click the
icon or to zoom in/out the time bar display ratio.
", and time axis panel will display specific time quantum. On the time axis,
", that means the selected channel will playback synchronously;
59
USER MANUAL