Chard IM-12SS Care And Use Manual
  1. Manuals
  2. Brands
  3. Chard Manuals
  4. Ice Maker
  5. IM-12SS
  6. Care and use manual

Chard IM-12SS Care And Use Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Stainless Steel
FEATURES:
- Choose from three
cube sizes: small,
medium, or large
- Built in reservoir drain
- Includes a convenient
ice scoop

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IM-12SS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Chard IM-12SS

Summary of Contents for Chard IM-12SS

  • Page 1 Stainless Steel FEATURES: - Choose from three cube sizes: small, medium, or large - Built in reservoir drain - Includes a convenient ice scoop...

  • Page 2: Important Safeguards

    IMPORTANT SAFEGUARDS SAVE THESE INSTRUCTIONS Read and understand all instructions before using the appliance. • NEVER put the unit near a hot burner or in an oven. • DO NOT use for any purpose other than intended use. • ALWAYS place the unit on a firm and stable surface. •...

  • Page 3: Overview Of Components

    OVERVIEW OF COMPONENTS COVER (With a transparent window to allow interior visibility) ICE TRAY ICE SHOVEL CONTROL PANEL A. LCD DISPLAY WINDOW 1. CURRENT CLOCK TIME 2. NO WATER DISPLAY ( When flashing: means no water in the unit. Need to pour water in.) 3.

  • Page 4: Unpacking Your Ice Maker

    UNPACKING YOUR ICE MAKER 1. Remove the exterior and interior packaging. Check that an ice basket and ice scoop are included. If any parts are missing, please contact our customer service department at 888-815-4252. 2. Clean the interior with lukewarm water and a soft cloth. Take out the ice basket and clean it. 3.

  • Page 5: Using Your Ice Maker

    USING YOUR ICE MAKER Open the cover, remove the ice basket and pour water into water reservoir. Keep water level below the level mark. Press “ON/OFF” button on the control panel to turn on the unit to begin the ice making cycle. Select the size of the ice cube by pressing the “Select”...

  • Page 6: How To Set The Timer

    HOW TO SET THE TIMER Press the TIMER button first - the default “3.0H” delay time will flash in LCD display window. Then press the SELECT button to select your desired delay time. Each press of the SELECT button will increase the flashing delay time by 0.5 hour. If you HOLD the SELECT button for more than 3 seconds, the delay time will increase very quickly.
  • Page 7 TROUBLESHOOTING Change the water in the inner Water temperature in inner Tank. Temperature of water is tank is too low. better set between 45 -90 Ambient temperature Please run the ice maker below water temperature in inner and pour colder water into tank is too high.

  • Page 8: Warranty

    WARRANTY IM-12SS / CHARD STAINLESS STEEL ICE MAKER C/O CI PO Box 444 Two Rivers, WI 54241-0444 chardinternational.com...

Table of Contents