Operation Symbols; Quickstart Label Symbols - Champion 100379 Operator's Manual

100379 - FRONT TINE TILLER

Operation Symbols

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of
these symbols will allow you to more safely operate the product.
SYMBOL
Choke Lever
CHOKE: left position
RUN: right position
Fuel Valve
CLOSED: left position
OPEN: right position
Throttle Lever
FAST: left position
Throttle Lever
SLOW: right position

Quickstart Label Symbols

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of
these symbols will allow you to more safely operate the product.
Starting the Engine
1. Check Oil Level. Recommended oil is 10W-30. The engine
can be seriously damaged without oil. Always check the oil
level before using. The machine must be resting firmly on
level ground when checking.
3mm corner radius; 2mm safe margin
2. Add gasoline with a minimum octane rating of 85 and an
ethanol content of less than 10% by volume.
This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for
3. Turn the engine switch to "ON" position.
outside parties without the explicit consent of Champion Power Equipment.
4. Move the choke lever to "CHOKE" position.
5. Move the throttle lever to "FAST" position.
MEANING
1
10W-30
5 6
LPN 1263-L-OP
Rev A
Size 75 x 35 mm
Artwork Notes
IMPORTANT SAFETY INSTRUCTIONS
SYMBOL
2 3
7 8
6. Move the fuel valve to "OPEN" position.
7. Pull starter cord.
K 152
8. Move the choke lever to "RUN" position.
Revision Changes
---
MEANING
Forward
Reverse
Engage Tines
Disengage Tines
4
Colors
CG1 --- ---
9