Assembly; Unpacking; Install Lower Handle; Install Upper Handle - Champion 100379 Operator's Manual

100379 - FRONT TINE TILLER

ASSEMBLY

Your tiller requires some assembly. This unit ships from our
factory without oil. It must be properly serviced with fuel and oil
before operation.
If you have any questions regarding the assembly of your tiller,
call our Technical Support Team at 1-877-338-0999. Please
have your serial number and model number available.

Unpacking

1. Set the shipping carton on a solid, flat surface.
2. Remove everything from the carton except the tiller.
3. Carefully cut each corner of the box from top to bottom.
4. Fold each side flat on the ground to provide a surface area
to work with the tiller.

Install Lower Handle

1. Mount lower handles onto tiller body using the (2) M8 bolts,
(4) flat washers, (2) lock washers, and (2) M8 lock nuts.

Install Upper Handle

1. Mount upper handle using (2) M8 round head bolts, (2) flat
washers, and (2) knobs.

Install the Guard Extension

1. Mount the side guard extensions as shown - slide guard
extension in and lock in place for each side.
2. Attach using the (6) M5 bolts and (6) flanged lock nuts.
Three sets for each side.

Install the Outer Tines

1. Remove cotter bolt and pin on each outer tine as shown:
ASSEMBLY
13