Table of Contents
Advertisement
Operating Manual
®
MELAprint
42
Log printer
EN
Dear Dr.
We should like to extend our thanks for the expression of trust in our company which you have displayed through the
purchase of this MELAG device.
As an owner-run and operated family concern founded in 1951, we have a long history of successful specialization in
hygiene products for practice-based use. Our focus on innovation, quality and the highest standards of operational
reliability has established MELAG as the world's leading manufacturer in the instrument treatment and hygiene field.
You, our customer are justified in your demand for the best products, quality and reliability. Providing "competence in
hygiene" and "Quality – made in Germany", we guarantee that these demands will be met. Our certified quality
management systems is subject to close monitoring: one instrument to this end is our annual multi-day audit conducted
in accordance with ISO 13485 and ISO 9001. This guarantees that all MELAG products are manufactured and tested in
accordance with strict quality criteria.
The MELAG management and team.
Advertisement
Table of Contents
Related Manuals for MELAG MELAprint 42
Summary of Contents for MELAG MELAprint 42
- Page 1 ISO 13485 and ISO 9001. This guarantees that all MELAG products are manufactured and tested in accordance with strict quality criteria.
-
Page 2: Table Of Contents
Preparing the connections ............................... 9 Inserting the paper roll ..............................10 Connecting a log printer to a MELAG device with a series data connection ..............11 Connecting the log printer to the steam sterilizer ....................... 12 Setting the log printer as the output medium (steam sterilizer) .................. 13 Test output ................................. -
Page 3: General Notes
Disposal MELAG devices are synonymous for long-term quality. When you eventually need to decommission your MELAG device, we offer a special disposal service. Simply contact your stockist. The packaging protects the device against transport damage. The packaging materials have been selected for their environmentally-friendly and recycling properties and can be recycled. -
Page 4: Safety Instructions
Safety instructions Safety instructions When operating the log printer, please observe the following safety instructions as well as those contained in subsequent chapters. Cable and power supply Operate the log printer only with the power cable included in the scope of delivery. ... -
Page 5: Chapter 1 - Device Description
Chapter 1 – Device description Chapter 1 – Device description Intended use The MELAprint 42 log printer serves batch documentation and log output of the MELAG devices listed below. Compatibility with MELAG devices Table 1: Overview of current device types... -
Page 6: Views Of The Devices
Chapter 1 – Device description Views of the devices Log printer Cover SEL key LF key Fig. 1: Paper tray closed Paper tray Roll dispenser Transport key Ink ribbon Fig. 2: Paper tray open Paper slot RS232 connection (10) DC connection for power supply Fig. -
Page 7: Network Adapter For Melaprint
Network adapter for MELAprint The network adapter for MELAprint permits the connection of the log printer to the (practice) network to print logs directly from network compatible MELAG devices. The network adapter is not included with the log printer and is optionally available. - Page 8 Chapter 1 – Device description Status displays network adapter for MELAprint Table 4 Status displays network adapter LEDs State Meaning Power The network adapter is switched on / connected to the power supply The network adapter is switched off / not live Flashes slowly Network adapter boots (the network adapter firmware is active) Flashes quickly Start configuration of the network adapter successful...
-
Page 9: Chapter 2 - Commissioning
Chapter 2 – Commissioning Chapter 2 – Commissioning Preparing the connections Tie a loop in the connection cable c. 2 cm from the socket. Surround the bow in the connection cable with the EMC filter. EMC filter Fig. 5: Preparing the connection cable Insert the socket (Fig. -
Page 10: Inserting The Paper Roll
Chapter 2 – Commissioning Inserting the paper roll WARNING Never pull the paper roll through the printing mechanism. This could result in premature wear of the paper feed. Always operate the paper feed with the LF key. If necessary, connect the log printer to the power supply. Push the cover to the rear to open the paper tray. -
Page 11: Connecting A Log Printer To A Melag Device With A Series Data Connection
Hold the SEL key depressed and then re-connect the power supply to the socket. The log printer will print, stating the settings and the character set. Connecting a log printer to a MELAG device with a series data connection Applies to the devices: ... -
Page 12: Connecting The Log Printer To The Steam Sterilizer
Only ever operate the log printer with the original power supply. Connect the serial cable of the log printer in the serial RS232 series data connection of the steam sterilizer. The operating manual of the respective MELAG device contains information as to the location of the RS232 data connection. -
Page 13: Setting The Log Printer As The Output Medium (Steam Sterilizer)
Chapter 2 – Commissioning Setting the log printer as the output medium (steam sterilizer) Switch on the steam sterilizer. Wait until the display shows the initial state. Press the (+) and (-) keys simultaneously to select the setup menu Function. The display shows the menu Function: Last batch number. -
Page 14: Connecting The Log Printer To The Melaseal Pro
Connecting the log printer to the MELAseal Pro Should you wish to use the log printer MELAprint 42 as output medium, connect it as follows: Connect the MELAprint 42 log printer serial connection cable to the RS232 interface on the rear of the sealing device. -
Page 15: Determining The Network Situation And Changing The Computer Ip Address (Temporary)
Determining the network situation and changing the computer IP address (temporary) To enable the MELAG device to recognise the log printer in the (practice) network, it mus be located in the same subnetwork as the MELAG device. The factory setting of the log printer IP address is 192.168.40.240. - Page 16 Chapter 2 – Commissioning The computer has a fixed IP address: Click on the [Advanced] button. PLEASE NOTE After concluding this configuration, reset the following settings to restore communication between the computer and the (practice) network. Note the data displayed before continuing with the configuration. Working under IP addresses select the [Add] pushbutton and enter any IP address (e.g.
- Page 17 Chapter 2 – Commissioning The computer obtains the IP address automatically: This configuration requires that the network adapter be connected directly with the computer. See “The computer has a fixed IP address”. Working in the tab Alternative configuration. Enter the IP address previously selected (e.g. 192.168.40.100). The subnet mask is updated automatically.
-
Page 18: Adapting The Ip Address Of The Label Printer To The (Practice) Network
Working under Gateway, enter the first three number blocks of the (practice) network. The fourth number block is specified by the (practice) network administrator. Enter the password “MELAG” under Authentication. Accept the settings with [Apply configuration]. Connecting the label printer in the (practice) network: Disconnect the Ethernet cable from the computer and connect the cable directly to the steam sterilizer integrated in the network, or to a free network socket. -
Page 19: Registering The Log Printer On The Melag Device
Activate the MELAG device and wait until the main menu is displayed. Connect the log printer power supply to the socket. Switch off the MELAG device and then on again. The MELAG device will recognise and save the IP address of the log printer automatically. -
Page 20: Setting The Log Printer As The Output Medium
Setting the log printer as the output medium Please note that you need to select the log printer MELAprint 42 as the output medium for immediate or subsequent log output independently of registration on the respective MELAprint device. The operating manual of the respective MELAG device shows how to set the output media on the device. -
Page 21: Chapter 3 - Maintenance
Chapter 3 – Maintenance Chapter 3 – Maintenance Changing the ink ribbon Change the ink ribbon as soon as the print quality declines. To open the paper tray push the cover backwards. Fig. 14: Opening the paper tray Remove the paper roll from the paper tray. Press on the imprint in PUSH. -
Page 22: Self-Test
Chapter 3 – Maintenance Insert the new ink ribbon in the bracket with the left-hand side first. The ink ribbon must snap in to the printer unit on the right-hand side. Fig. 16: Inserting the ink ribbon Check the ink ribbon for its correct position. Tighten the ink ribbon by turning the transport key in the direction of the arrow. -
Page 23: Technical Data
Technical data Technical data Model name Device dimensions (HxWxD) 6.2 x 16.5 x 14.1 cm Weight 350 grammes without paper roll Electrical connection 100-250 V, 47-63 Hz, 0.5 A DC 5 V, 4 A Network cable 1.5 m long Ambient temperature 0 –... -
Page 24: Appendix A - Accessories
Appendix A - Accessories Appendix A - Accessories Consult your MELAG stockist regarding accessories and consumables. When order consumables, please state the serial number of your log printer and use the MELAG order no. as listed below. Article Order no. - Page 26 MELAG Medizintechnik oHG Geneststraße 6-10 10829 Berlin Germany email: info@melag.de Web: www.melag.de Responsible for content: MELAG Medizintechnik oHG Subject to technical alterations Date of update: 2017/06/26...
Need help?
Do you have a question about the MELAprint 42 and is the answer not in the manual?
Questions and answers