Belkin Conserve Gateway User Manual page 9

insTallaTion and seTuP
Here's what the installer did to set up
your Conserve Gateway:
.
Found the optimal location for the Conserve Gateway in your home.
Your Conserve Gateway requires a strong wireless signal to link to your
smart meter and other connected devices. Please avoid moving the
Conserve Gateway. if you experience connection problems, see the
Troubleshooting section at the back of this guide.
.
Connected your Conserve Gateway to an appropriate power source.
Your Conserve Gateway needs to be powered on at all times and cannot
be connected to an outlet controlled by a switch.
.
Established a secure wireless connection to your smart meter.
Your Conserve Gateway transmits information about your energy use
from the smart meter to your personalized Conserve interface to help
you understand your bill and set energy goals.
07