Belkin Conserve Gateway User Manual page 15

GeTTinG ConneCTed
Connecting through wired Internet:
if you have broadband internet access and a compatible router, linking
your Conserve Gateway to the internet will enable additional functionality,
such as remote access.
Linking your Conserve Gateway to your home network using an
Ethernet cable
Step 1:
Plug an ethernet cable into the network Port
on the back of the Conserve Gateway.
Step 2:
Plug the other end of the ethernet cable into your
home network router.
Note: The Conserve Gateway is not a network router. Your home
computer should be connected directly to your home router. do not
connect your home computer to the Computer Port on the Conserve
Gateway if you are also plugged into the network Port.
13
to modem
Your Account Information