Names And Functions Of Remote Controller - Hitachi SPX-WKT2 Installation Manual

3. NAMES AND FUNCTIONS OF REMOTE CONTROLLER

The figure below shows all the indications for reference. The actual display during operation is different.
Display part
Room Temperature Indicator
(Around Remote Controller)
Operation Mode Indicator
Eco Mode and Forced Cooling
setting, and External device
operation Indicator
Operation Guide Indicator
Operation Indicator Lamp
It lights while the unit is operated,
and it blinks in an abnormal
condition.
START/STOP Button
(Operation indicator lamp)
Press this button to start operation.
Press it again to stop operation.
Operation part
NOTE
• Do NOT press the buttons hard or press with sharply pointed material such as a ball point pen.
The operation part of the remote controller may be damaged.
• Make sure that the buttons are pressed softly with fingers.
Fan Speed Indicator
Cross Button
 : Up button
 : Down button
 : Left button
 : Right button
- 4 -
Auto Swing Indicator
Enter Button
Eco Auto Off Indicator
It is indicated when the eco auto
off function is set.
Sleep Timer Indicator
It is indicated when the sleep timer
is set.
Timer Indicator
It is indicated when the timer
function is set.
Operation Lock Indicator
It is indicated when the operation
lock function is set.
Filter Sign Indicator
It is indicated at the set period for
filter cleaning.
Setting Temperature Indicator
Menu Button
To display Menu.
Eco Button
By pressing this button during
operation, the unit performs the
eco operation.
Return/Help Button
To return to the previous screen.
When pressed at the normal mode
screen, will display Help Menu.