Approbation And Certification; Sustainability; Energy Efficient; Wifi And Zigbee Radio - Philips Hue Bridge 2.0 User Manual

Note 1:
For all countries in the above list except US,Canada,Mexico,EU: Liteon is
requested to provide the additional cost and throughput time for approbation for
each of these countries.
Note 2:
For roadmap purposes, Liteon is requested to provide the additional cost and
throughput time for approbation if Thailand, Malaysia, United Arab Emirates and
Indonesia are added to this list.
6.2

Approbation and certification

WiFiand WAC certification: to be done by the Supplier.
Certificates should be registered with Philips' name.
ZigBee certification: will be arranged by Philips.
Supplier to provide list of required approbations/certifications for this product, and
recommendation for associated test labs/notify bodies; Philips will review and approve.
Supplier to submit to Philips after certification: Test reports, copies of the certificates,
name of Notified Body and test house used for certification.
6.3

Sustainability

RoHS and REACH compliant
WEEE compliant
Philips Green Policies (www.philips.com/sustainability)
6.4

Energy efficient

Energy Efficiency of PSU and IP bridge should be conform industry standards.
Standby of the PSU should be Energy Star class 5 compliant, or better.
6.5

WiFi and ZigBee radio

ZigBee Radio IEEE 802.15.4, ISM bands 2.4GHz and WiFi radio IEEE 802.11.
Maximum output power, ZigBee range should be comparable to wifi range.
EIRP should be as good as possible with a cost effective solution not exceeding
country regulations (e.g., 20 dBm for Europe). WiFi and ZigBee antennas are internal.