Firmware Upgrade; Features - Pyle view PLDVD170 Operating Instructions Manual

FEATURES

POWER
Operating voltage range: 12V
Low p ower consumption design.
COMPATIBILITY
This DVD player can play the following discs:
DVD, CD, VCD, DVCD, MP3, CD-R,CD-RW .
SYSTEM FUNCTIONS
VIDEO OUTPUT SYSTEM
System AUTO , NTSC, PAL or PAL M switchable.
TV TYPE
[4:3LB], [4:3PS] or [16:9] will be selected conforming to the actual monitor in use.
AUDIO OUTPUT
2 channel Dobly digital output and supports
analog output of MPEG-1, MPEG-2 layer 2 and MP3.
ADDITIONAL VIDEO FEATURES
Multi- angle, multi-view, multi-audio function
Multi -level forward, backward motion
program, resume stop and repeat function
Play position memory function
AUDIO SYSTEM
FM 15 preset stations, receiving frequency range (87.5 - 108 MHz)
MW 5 preset stations, receiving frequency range (530 - 1710 KHz)
LW 5 preset stations, receiving frequency range (144 - 279 Khz)
SPECIAL NOTE - PLEASE READ
If the Firmware Upgrade menu appears on the screen, be sure
to select [CANCEL] by pressing
to leave the menu.
On Screen
Do not select Partial or Total, doing so may cause the player
to malfunction. If you want to select Partial or Total, you must
have to consult the qualified personnel.
+20%
D C.
-10%

Firmware Upgrade

Current:MC0.08 New:JHD C 0.91
Cancel Partial Total
3 4
/ and then press ENTER