Sony Cyber-shot DSC-W125 Instruction Manual page 58

Changing the screen display
Indicators on
• If you view images in bright outside light, adjust
the brightness of the LCD backlight up.
However, the battery power may decrease faster
under such condition.
• The histogram does not appear in the following
situations:
While shooting
- When the menu is displayed.
- When recording movies.
During playback
- When the menu is displayed.
- In index mode.
- When you are using playback zoom.
- When you are rotating still images.
- During playback of movies.
• During playback, you cannot turn the LCD
screen off.
• A large difference in the histogram displayed
during shooting and playback may occur when:
- The flash strobes.
- The shutter speed is slow or fast.
• The histogram may not appear for images
recorded using other cameras.
• When you set the LCD screen to off, the digital
zoom does not function. When you select
t
(Flash mode)/€>
(Self-timer)/~
(Macro),
the image is displayed for about two seconds.
• If you turn the power off and on again while the
LCD screen is off, the indicators will be on.
Histogram display
(page 22)
During playback,
the image
information is
displayed.
'Mr-;-+T.-- •
(DISP) (Screen
display) button
Histogram on*
c
Indicators off*
Indicators on*
Each time you press .... (DISP) on the
control button, the display changes as
follows:
LCD screen off
* The brightness of the LCD Backlight is set to up.
21