What’s Included Base station AC Ethernet cable power adapter Base station Welcome Thank you for choosing Arlo Pro. Camera AC power adapter Rechargeable battery Getting started is easy. Arlo Pro Wire-Free camera Mounting Power adapter Magnetic wall screws cable mounts...
Charge Your Arlo Pro Camera Insert the Battery Into Your Camera Connect the power adapter cable to the camera power adapter. Unlock the battery compartment by pressing and holding the latch. Connect the other end of the adapter cable to the camera.
Connect Your Base Station to the Internet Get the App For the best experience, download the Arlo app for your smartphone by Connect the base station to your Connect the base station AC scanning this QR code. router using an Ethernet cable.
Get an Account Turn the base station on by The Power LED and Internet LED Launch the app from your Or from a computer, visit updates.netgear.com/arlostaging pressing the On/Off button. smartphone and tap the New on the front of the base station System Setup button.
Sync Your Cameras With the Base Station Bring the camera within 1 to 3 feet (30 to 100 centimeters) of the Press the Sync button on the top of the base station for base station. about two seconds and then release the button. Note: Cameras must be synced one at a time.
LED blinks rapidly to confirm syncing. Tip: Use the Arlo app in Position mode (found in Camera Settings) to help aim the camera. The camera is ready for viewing. The LED blinks amber if the sync is not successful. You must repeat the ¾...
You’re Done! Base Station LED Guide Congratulations! Your Arlo System is set up and ready to go. Power Internet Camera To view useful tutorial videos, find troubleshooting tips, or get support, Green Green Green visit https://www.arlo.com/support/. The base station The base station Cameras are is powered on.
Need help?
Do you have a question about the Pro and is the answer not in the manual?
Questions and answers