Calculator - Zte Adamant F450 User Manual

options and press the OK Key:
More Sensitive: The voice commands system will increase the sensitivity and displays
more potential matches.
Recommended: The voice commands system will control the sensitivity automatically.
Less Sensitive: The voice commands system will decrease the sensitivity to filter out
more potential matches. If you are frequently asked to try again, select More Sensitive.
 Adaptation
Adaptation is the process of optimizing the voice recognition software to your voice.
Adaptation requires recording your voice, which is then used to customize the voice
recognition system.
1. Select Adapt Voice or Reset Voice and press the OK Key.
Adapt Voice: Requires that you make recordings of your voice to customize the voice
recognitions system. It will take a few minutes.
Reset Voice: Once you finish the adaptation process, you can reset the adaptation to the
factory default settings. The Reset Voice menu option only appears after you finish the
Adapt Voice process.
2. Press the OK Key to begin.
3. Wait for the beep and then repeat the sentences using a normal tone of voice.
4. When you are finished with a full session, you will reach a screen that reads Adaptation
Complete.
Note: Adaptation will take a few minutes, and you should be in a quiet environment.
 Prompts
Select Mode or Audio playback and press the OK Key.
 Mode: Select the Voice Commands system mode from the following:
 Prompts: Read out Voice Commands prompts.
 Read Out + Alerts: Read out and Alert tone prompts, dialing digits and menus at the
same time.
 Read Out: Read out prompts, dialing digits and menus.
 Tones Only: Prompts you with a tone only.
 Audio playback: Allows audio playback to play through the speakerphone or through the
earpiece. Select Speakerphone or Earpiece and press the OK Key.
 Timeout: Allows you to control how long the system listens for a command before timing
out.
 About
Check the information about Voice Commands system.

Calculator

Your mobile phone has a built-in calculator capable of performing simple mathematical
calculations.
1. Press the OK Key [MENU] > Settings & Tools > Tools > Calculator.
2. Enter a number with the keypad.
3. If necessary, press the Right Soft Key [Operators] to insert ( , ), or Exponent.
4. Press the Directional Key to select a mathematical function (add, subtract, multiply or
divide).
5. Enter the next number with the keypad.
6. Press the OK Key to view the result. Press the Left Soft Key [Clear] to clear the inputs or
result.
Note: Press the * Key to insert a decimal. Press the # Key to change the sign of a number to
negative.
28