When To Change The Motor Protection Filter; How To Change The Motor Protection Filter; When To Replace The Exhaust Filter - Miele HS11 Operating Instructions Manual

 Insert the hose connector into the
suction socket on the vacuum
cleaner until it clicks into position. To
do this, line up the guides on the two
pieces.
When to change the motor protection
filter
Replace this filter every time you start a
new packet of filter bags.
Every packet of original Miele filter bags
contains a motor protection filter. Multi-
packs contain four motor protection fil-
ters.
How to change the motor protection
filter
 Open the dust compartment lid.
 Pull the filter bag out by the grip on
the collar.
 Lift up the filter frame until it clicks
and remove the old motor protection
filter. Hold by the clean, unsoiled sec-
tion to remove it.
 Replace with a new motor protection
filter.
 Close the filter frame.
 Fit the filter bag into the holder as far
as it will go.
 Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the filter
bag when doing so.

When to replace the exhaust filter

Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters.
21