Data Usage - TP-Link Neffos C7 User Manual

Operator
Operator
Note:
1. If you disable a SIM card, you will be unable to use it to make calls, send messages, or use mobile data.
2. You can configure whether you want to select a SIM card manually or use the default SIM card each time you make a
call. If you choose to use the default SIM card, your phone will use that SIM card for all outgoing calls.
3. Your phone supports only dual card dual standby single pass, which means you cannot use both SIM cards for calls
or data services simultaneously.

17. 3 Data usage

On the Home screen, tap
• View data usage: Data usage display on the top of the screen.
• Enable cellular data: Switch on Cellular data to enable it. To enable cellular data, you have two more ways:
swipe down from the status bar to open the Quick Settings Panel and then tap
Settings -> Dual-SIM & network and then switch on Cellular data.
• View apps using cellular data:
Turn off the switch next to the app to prohibit it from using the cellular data.
• Enable data saver: Tap Data saver and switch it on to enable data saver. For another way to enable data
saver, see Notification Panel
when Data Saver is on, tap Data saver -> Unrestricted data access and turn on the switch next to the app
you want to enable using unrestricted data.
• View detailed cellular data usage:
select the time period, then detailed data usage for all apps will display on the screen. Tap
billing cycle setting, this can also be set in Billing cycle.
• Configure billing cycle settings:
and data limit.
• View WLAN data usage:
• Set metered network for WLAN:
Network restrictions and turn on the switch next to the WLAN name to treat the WLAN like cellular. Apps
may warn before using these networks for large downloads.
Settings
Chapter 17
Settings -> Data usage, you can:
Tap Apps using mobile data network to view apps able to use cellular data.
-> Data Saver. Still, you can have some apps allowed to use unrestricted data
Go to Cellular data usage screen, tap the date on the top left corner to
Tap Billing cycle to configure more setting about billing cycle, data warning
Tap WLAN data usage to view the detailed WLAN usage.
This function only works when the phone is connected to WLAN. Tap
Tap to configure more settings of you SIM cards
Select default SIM for data services
Select default SIM for phone calls
Select default SIM for messages
Enable or disable cellular data
Enable or disable data roaming
Enable or disable WLAN aggressively handing over the data
connection to Cellular when WLAN signal is low
Mobile data or go to
to configure
64