Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for L.R. Baggs ALIGN SERIES REVERB
Summary of Contents for L.R. Baggs ALIGN SERIES REVERB
- Page 1 ALIGN SERIES REVERB USER’S GUIDE...
-
Page 2: Getting Started
INTRODUCTION The Align Reverb was built from the ground up to complement the natural body dynamics and warmth of acoustic instruments that we love so much. The circuit seamlessly integrates the wet and dry signals with the effect in side chain so that it never overwhelms the original signal. -
Page 3: Top Features
TOP FEATURES A. TONE This is a simple control to help you alter the tone of the reverb itself. It will not affect the tone of your instrument, only the tone of the reverb. Turn the control clockwise for a present, reflective sound or counter- clockwise for dark, subdued tones. -
Page 4: Instrument Input
B. INSTRUMENT INPUT The ¼” input is an unbalanced (mono), all-discrete input. Plugging into the input will activate the Reverb, therefore, unplugging will turn the system off. C. DECAY The decay control adjusts the length of the reverb tail. Start with the control counter clockwise and you’ll hear subtle reflection of your acoustic instrument. -
Page 5: Side Features
G. VOLUME The master volume will help you find a balance between your engaged and bypassed signal. It is only active when the engage light is on. Keep in mind that the level of the reverb control can affect this balance, so you may need to adjust the volume as you adjust the effect. -
Page 6: Specifications
SPECIFICATIONS 1/4” INPUT Input Impedance: 2.2 Megohms Preamp Gain: +6dB Input Level: -25dBv to +5.7dBv (0.056Vrms to 1.944Vrms) LINE OUTPUT Output Level: +2.6dBv (1.343Vrms) Unbalanced Output Impedance: 220 Ohms POWER DC Power Consumption: 450mW Max at 9V DC Current Draw: 48mA Voltage Range: 7.5VDC –... -
Page 7: Product Registration & Warranty Information
Register the Align Reverb online at: lrbaggs.com/register LIMITED WARRANTY L.R. Baggs warrants to the using purchaser that this product shall be free of defects in workmanship and materials under normal and proper use for a period of one year. If you experience problems with the Align Reverb, please contact your dealer. - Page 8 483 N. Frontage Road, Nipomo, CA 93444 ph: 805.929.3545 lrbaggs.com...
Need help?
Do you have a question about the ALIGN SERIES REVERB and is the answer not in the manual?
Questions and answers