Table of Contents
Advertisement
16
5. Connect to the Network
Radiance 10/100 Mbps Services Line Card
• Insert the card into a slot in the chassis. Make sure that the top and
bottom edges of the board are aligned with the card guides in the
chassis. Do not force the card into the chassis unnecessarily. It should
slide in easily and evenly.
• Slide the card in until the top and bottom edges of the front panel are
flush and even with the edges of the chassis.
• To secure the card to the chassis, turn the thumbscrew clockwise until
it is snug. The card is now properly installed and ready for connection
to the network.venly.
To connect the line card to the network, remove the dust plug from the
SFP transceiver and insert the cables into the appropriate connectors as
illustrated below. Make sure the card is secured to the chassis before
making network connections.
Card Guide
Advertisement
Table of Contents
