Unpacking And Cleaning; Placement The 8" Jointer - Magnum MI-81350 Operating Manual

Unpacking and cleaning

To ensure maximum performance from your 8"
jointer, clean it properly; and install it accurately
before use. As soon as you receive the jointer,
we recommend you follow these procedures:
1. Finish removing the contents of the shipping
carton and compare with the contents list.
2. Report damage, if any to your local distributor.
3. Clean all rust protected surfaces with a mild
solvent or kerosene. Do not use lacquer
thinner; paint thinner, or gasoline. These will
damage painted surfaces.
4. To prevent rust, apply a light coating of paste
wax to surface.
Although some users prefer a wax coating for
the table surfaces, white talcum powder rubbed
in vigorously once a week with a blackboard
eraser will fill any casting pores and form a
moisture barrier. Talcum powder will not stain
wood or mar finishes.

Placement the 8" jointer

This machine should be installed and operated
only on a solid, flat and stable floor that is able to
support the weight of the Jointer (366 lbs-166kgs)
and the operator.
Using the dimensions shown as below (L 66"x
W15"x H 36"), plan for placement within your
shop that will allow the operator to work
unencumbered and
unobstructed by foot traffic or
other tools or machinery.
5