What Is Included; Product Description; Product Overview; Fuse Replacement - TECshow Bubble Master 2 User Manual

What Is included

Bubble Master II
Hanging Bracket with Mounting Hardware
Power Cord
Quick Reference Guide

Product Description

The Bubble Master II features 3 double wands, a manual bub-
ble button, and an extremely high output for when you need
bubbles for a large area.

Product Overview

BUBBLE MASTER 2
ENGLISH VERSION
Mounting
Before mounting this product, read the Safety Notes. Place
bubbler on a flat, level surface or use the mounting brackets
provided. Ensure that the bubbles are not shooting directly
in anyone's face or above heavy traffic areas, as bubble fluid
leaves a slippery surface. The bubble machine must not have
more than a 5° angle of inclination.
AC Power
This product has a voltage-specific power supply that can work
with an input voltage of 120 VAC, 60 Hz or 230 VAC, 50 Hz.
To eliminate wear and improve its lifespan, during periods of
non-use completely disconnect from power via breaker or by
unplugging it.

Fuse Replacement

1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the
fuse holder.
3. Pry the fuse holder out of the housing.
4. Remove the blown fuse from the holder.
5. Replace with a fuse of the exact same type and rating.
6. Insert the fuse holder back in place and reconnect power.
p. 3