Page 1
HumPRC Series Evaluation Module Data Guide...
Page 2
ANSI and NFPA standards. It is solely the responsibility of any Linx customer who uses one or more of these products to incorporate appropriate redundancies and safety standards for the Life and Property Safety Situation application.
Page 3
The module provides long-range transmission at 868MHz and 900MHz for multi-region operation, utilizing frequency hopping and industry-standard encryption for secure and robust communications. The HumPRC Series interoperates with Linx’s HumPRO family, making it the only remote control solution that simultaneously supports data applications for seamless integration with sensor and control IoT applications.
Ordering Information Electrical Specifications Ordering Information HumPRC Series Transceiver Specifications Part Number Description Parameter Symbol Min. Typ. Max. Units Notes HumPRC Series Carrier Board, Not Certified, Through-Hole Pin Power Supply EVM-***-PRC Interface, MMCX Connector for the Development System Operating Voltage HumPRC Series Carrier Board, Certified, Through-Hole Pin EVM-***-PRC-CAS TX Supply Current...
Pin Assignments Pin Descriptions Pin Number Name I/O Description 38 S0 ANTENNA GND (RF Connector) 39 S1 12, 18, No Electrical Connection. Do not connect — 22–37, 47-56 any traces to these lines. 40 S2 MODE_IND 41 S3 Pull this line high to enable the module to RESET CMD_DATA_IN 42 S4...
Schematic Pad Layout Figure 7 shows the schematic diagram for the evaluation module. Figure 8 shows the recommended PCB layout for the evaluation module. 0.05” 0.045” 0.05” 0.065” 0.09” 5 x Ø0.035” 0.05” 0.05” 0.075” 51 x Ø0.026” 0.05” 1.17” 0.80”...
Page 7
Dimensions 11.51 mm (0.453 in) The figures below show the dimensions for the three variants of the module. 7.54 mm (0.297 in) 8.35 mm 5.98 mm 4.24 mm (0.329 in) (0.235 in) (0.167 in) Ø6.35 mm (0.25 in) Ø7.93 mm (0.312 in) 29.72 mm (1.170 in)