Programming Homelink - Toyota PRIUS ALPHA 2012 Quick Reference Manual

■

Programming HomeLink

STEP 1
STEP 2
®
Point the remote control trans-
mitter for the device 1 to 3 in. (25
to 75 mm) from the HomeLink
buttons.
Keep the HomeLink
light in view while programming.
Press and hold one of the
HomeLink
transmitter button. When the
HomeLink
changes from a slow to a rapid
flash, you can release both but-
tons.
If the HomeLink
comes on but does not flash, or
flashes rapidly for 2 seconds and
remains lit, the HomeLink
is already programmed. Use the
other
"Reprogramming a HomeLink
button" instructions. (→P. 385)
3-5. Other interior features
®
indicator
®
buttons and
®
indicator
®
indicator light
®
buttons or follow
®
the
3
light
button
the
®
381