2-2. Instrument cluster
■
When driving on snowy roads or in other bright environments
When the highest level of brightness has been reached, the display can be
made even brighter by pressing and holding "∧" on the brightness control
button.
Pressing "∨" on the brightness control button or turning the "POWER" switch
off will cause the brightness level to revert to the original level.
■
Display speed setting function
The speedometer can be set to display only when a desired vehicle speed is
reached.
STEP
1
Press and hold the "HUD" main switch while the vehicle is stopped
and while the head-up display is showing only the speedometer.
The speedometer will begin to flash.
STEP
2
Set the desired display speed on the speedometer by pressing "∧"
and "∨" on the display position adjustment button.
Press "∧" to raise the speed and "∨" to lower. The speed will change
by 1 mph (1.6 km/h) each time the button is pressed, and continu-
ously by 10 mph (16 km/h) when the button is pressed and held.
STEP
3
Press and hold the "HUD" main switch to finish setting.
■
Head-up display
The head-up display may seem dark and hard to see when viewed through
sunglasses, especially polarized sunglasses.
Adjust the brightness of the head-up display or remove your sunglasses.
■
When the 12-volt battery is disconnected
The head-up display settings will be reset.
248