Entering Cell Phone Numbers; Setting Contact On/Off Alarms And Delay - RDT Informant Installation And User Instructions Manual

Entering Cell Phone Numbers

Change Cell Phone Numbers
512-555-1234
#1 1)New 2)Del ▼
Send Test Message
Send Test Message
Select numbers 1-5

Setting Contact On/Off Alarms and Delay

The on/off contact sensing is set up in the sub-menu. See page 5 for more info on setting
those. However, the delay time before sending an alarm is set on this page.
Set Contacts 1 and 2 Delay Time
Contact1 dly 0 ▲
Contact2 dly
Adjusting Delay Time (minutes)
Contact1 dly 0
1) Change
This screen permits five cell phone numbers
to be entered, changed or deleted. In the
event of an alarm, all the numbers are sent a
text message alarm.
Be sure to send a test message to every
phone number entered.
The two dry contacts frequently monitor
freezer and refrigerator doors and alarm if
the door is left open for a certain time. If
▼
the value is set to zero, there is no delay.
A submenu function enables the contacts
operation.
The value is minutes until an alarm is
activated. These devices frequently monitor
refrigerator doors and alarm if the door is left
open for a long time. If set to zero, there is
no delay. A submenu function enables the
contacts operation.
10