General Maintenance - sfty Sense Product Manual

General maintenance

Cleaning your sfty Sense
Your sfty Sense doesn't need much maintenance but
you should keep it clean as dust buildup can prevent
it from working properly.
We recommend you first push the test button to
desensitise the device for 10 minutes.
Remove the sfty Sense from the ceiling or wall. Wipe
the outside with a clean, slightly damp cloth
Gently vacuum the inside from the slits on the outside
Note: Never use detergents or solvents (like glass
cleaner) on your sfty Sense and do not spray air
fresheners, hair spray or other aerosols near it. Do
not get water inside the alarm or paint over it.
Testing the device
Test your sfty Sense once a month by pressing and
holding the Test button. Once you release the alarm
will stop. If you have multiple devices in your home,
the siren on the devices will sound for 5 seconds. You
can read more about testing your sfty Sense on page
9.
Note: Because of dust and dirt buildup, we
recommend you to replace your Sense within 10
years.
6
Changing the batteries
The batteries should be changed once a year. Make it
a habit to change the batteries on December 1. This is
the month when the most fires occur!
It is important to test the alarm after switching
batteries, to make sure the device works properly.
This can be done by holding the test button.
If your sfty Sense starts to beep once every three
hours, or if you receive messages about a low battery
in the app, the batteries need to be replaced. Always
keep an extra set of batteries in your fridge.
Remember to place the batteries in the right direction,
look for the +/- sign in the battery compartment.
Note:
- Use 4 Lithium AA batteries, Energizer L91-FR6 only.
- Non-rechargeable batteries, do NOT try to recharge.
WARNING
Risk of explosion if the battery is not replaced
correctly. Replace only with the same or a similar
type as mentioned above. Dispose of used
batteries according to manufacturer's
instructions.
V1.3, January 2018