sfty Sense Product Manual
Hide thumbs
Also See for Sense:
- Product manual (12 pages) ,
- Quick installation (12 pages) ,
- Manual (20 pages)
Table of Contents
Related Manuals for sfty Sense
Summary of Contents for sfty Sense
- Page 1 Sense Product Guide V1.3, January 2018...
-
Page 2: Table Of Contents
Contents Your sfty Sense Setup and installation Placing and mounting your sfty Sense General maintenance Software upgrades Home settings Key functionality Light and sound signals Statement of compliance with EU Directives V1.3, January 2018... -
Page 3: Your Sfty Sense
Your sfty Sense sfty Sense is a complete home safety unit. It is a smoke detector, which is always on – and a motion detector, that you can turn on and off. In addition, sfty Sense measures temperature and humidity. That’s a lot of things for a small, battery-powered device to do - and it doesn’t end there. -
Page 4: Setup And Installation
Name your new home and tap next. Then Your sfty Sense will now start to configure. choose a 4-digit PIN code for your remote The app will prompt when the sfty Sense is control and tap next. successfully installed. Multiple devices Any difficulties? ●... -
Page 5: Placing And Mounting Your Sfty Sense
If you are mounting your sfty Remember to place the batteries in the right direction, Sense on a sloped ceiling, be sure to place it at least look for the +/- in the battery compartment. Place the 1m from the top. -
Page 6: General Maintenance
10 minutes. batteries, to make sure the device works properly. Remove the sfty Sense from the ceiling or wall. Wipe This can be done by holding the test button. the outside with a clean, slightly damp cloth... -
Page 7: Software Upgrades
Software upgrades One of the great things about sfty Sense is that it can The actual upgrade takes less than thirty seconds. be upgraded over the air (WiFi). When improvements During this short period, normal operation will be or new features become available you will receive a suspended. -
Page 8: Key Functionality
Key functionality Burglar alarm Remote control Your sfty Sense is installed with motion detection In case your phone is out of battery or unavailable, or which works as a burglar alarm that you can turn ON you have someone in the house that does not have a and OFF through the app. - Page 9 Test Button The smoke detector is always on. If smoke is The test button is on top of the sfty Sense and also detected, all trustees added to your home will be doubles as an indicator that emits colored light signals notified and the alarm siren in sfty Sense will sound in various situations.
-
Page 10: Light And Sound Signals
The light in the motion sensor will gently blink green test/mute button will flash blue and red once to every 30 seconds to show you that your sfty Sense is indicate that the device is booting up. This also alive. -
Page 11: Statement Of Compliance With Eu Directives
Statement of Compliance with EU Directives Sfty AS hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directives, 1134/EN 14604:2005, as applicable. This technical documentation as required by conformity Assessment procedure is kept at the... - Page 12 V1.3, January 2018...
Need help?
Do you have a question about the Sense and is the answer not in the manual?
Questions and answers