Setup And Installation - sfty Sense Product Manual

Setup and Installation

Before you start, make sure to download the app from
AppStore or Google Play, and create an account. We
recommend you have our "Quick Guide" beside you
when installing your sfty Sense.
1) Add new device
Tap the menu button on the app main page
Tap "Add new product or service"
Tap on the picture of the sfty Sense
Tap on "Create a new home"
2) Name
Name your new home and tap next. Then
choose a 4-digit PIN code for your remote
control and tap next.
Multiple devices
You can have up to 25 devices connected together.
The devices require WiFi to be interconnected. If one
device detects smoke and triggers an alarm, all the
connected devices will sound their alarm. If you press
and hold the test button on one of your devices, the
connected devices will sound their siren for 5 seconds
and the selected trustees will receive a notification.
During a low battery warning, the motion detector will
be disabled, and there is no interconnection between
the device and other devices, but the smoke detector
will remain active as long as there is battery left.
4
Connect your phone to your WiFi network. Only 2.4
Ghz is supported. (2,4 Ghz is the most common WiFi
network).
3) Select device
Read the information and tap next.
Type in your Wi-Fi password then tap next
Insert batteries and select your sfty Sense
device
4) Connect device
Your sfty Sense will now start to configure.
The app will prompt when the sfty Sense is
successfully installed.
Any difficulties?
● Is your WiFi network 2.4 Ghz? (5 Ghz is not
supported)
● Did you type in the correct password?
● Was the WiFi light pulsating blue during
installation? (If not - take out one battery
and put it back in again). It should be
pulsating as soon as you start
● Tried restarting your phone?
If you need more information or support,
check out our "Quick guide" or send us an
email at support@sfty.com, or call us:
(+47) 4000 7389
V1.3, January 2018