1. Manuals
  2. Brands
  3. Plus Manuals
  4. Projector Accessories
  5. CaptureBoard C-12S
  6. Service manual

Plus CaptureBoard C-12S Service Manual

Hide thumbs Also See for CaptureBoard C-12S:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Captureboard
C-12S/C-12W
SERVICE MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CaptureBoard C-12S and is the answer not in the manual?

Questions and answers

Related Manuals for Plus CaptureBoard C-12S

Summary of Contents for Plus CaptureBoard C-12S

  • Page 1 Captureboard C-12S/C-12W SERVICE MANUAL...

  • Page 2: Table Of Contents

    CONTENTS 1. COMPLIANCE OF SAFE REPAIR ....... 1 9-5. Settings ..............27 1-1. Cautions during Product Movement ......1 9-6. Hardware Setup ............28 1-2. Cautions during disassembling and assembling ..1 10. TROUBLE SHOOTING ..........31 2. SPECIFICATIONS ............2 11.

  • Page 3: Compliance Of Safe Repair

    1. COMPLIANCE OF SAFE REPAIR Be sure to read this Service Manual before providing services. In the PLUS captureboard, full consideration is taken to ensure the safety for a fire, electric shock, injury, harmful radiation, and sub2stance. Therefore, observe the notice described in this Service Manual so that the safety is kept when providing services. Moreover, be sure to observe the notice described in the Instruction Manual.

  • Page 4: Specifications

    2. SPECIFICATIONS 2-1. Product Specifications Standard (C-12S) Wide (C-12W) BOARD TYPE (Model name) Self-standing (T-shaped legs), or wall mounting Form Installation method W1470 D700 H1970 (Max) mm W1970 D700 H1970 (Max) mm External dimensions (T-shaped legs* 31 kg (excluding printer) 35 kg (excluding printer) Main unit weight 9.6 kg...

  • Page 5: Equipment Connections

    3. CONNECTION TO THE COMPUTER Note: * Do not connect this machine to the personal computer before installing the software. * Do not connect more than one Captureboard to one personal computer. Captureboard PRINTER DC-24V Monitor Output To the PC dedicated USB port (Type B) Personal Computer To the personal computer...

  • Page 6: Location Of Parts And Specifications

    4. NAMES OF THE PARTS AND SPECIFICATIONS 4-1. Names of the Parts Front panel of main unit Frame cover Main unit Sheet Use the dedicated markers to draw or write on the sheet. project the image of the personal computer with the projector. Control panel Pen tray Printer table...
  • Page 7 NAME OF THE PARTS AND SPECIFICATIONS Back panel of main unit DC input connector Connect this with the DC plug end of the AC power adapter.(Only connect the supplied AC power adapter; nothing else.) Personal computer (PC) dedicated USB port (Type B) Connect this with the USB port (type A) of the Special software can be used to transfer image data directly to the computer and set the...

  • Page 8: Operation Panel Of Main Unit

    NAME OF THE PARTS AND SPECIFICATIONS 4-2. Operation Panel of Main Unit 1 ON/Standby button Turns the captureyboard’s power on and off (standby mode). The function settings can be made by pressing the Density and ON/Standby buttons simultaneously. C-12 Note: If the Erase Reminder function has been set, the sheet moves to the surface that has not yet been erased before the power turns off *1.

  • Page 9: Error Display

    • You have attempted to use a function • The settings can be changed using disabled by the security settings. the exclusive software. For details, contact your nearby PLUS Vision sales office, dealer or store. Restrict color mode • Setting for disabling printing/storing in •...
  • Page 10 NAME OF THE PARTS AND SPECIFICATIONS Printing in the same ratio as the sheet surface (Model C-12W) Model C-12W is the wide type Captureboard which will compress printing in the horizontal direction resulting in crowded printing of the A4 or LETTER size sheet; for example, a circle will become an ellipse. To print in the same aspect ratio as a drawn diagram, the compression mode will be changed (to suit the paper size according to the sheet surface image).

  • Page 11: Setting The Time

    5. SETTING THE TIME Set the copyboard's clock properly. The date and time are printed in the header/footer when printing and recorded in the file data when saving the file. Overview of the Operation C-12 1 Switch to "Time setting" Press the + or - button.
  • Page 12 SETTING THE TIME 3 Press the + button or the - button, select 20 (the first 2 digits of the year), and press the Print Print button to finalize. There will be a change to the “last 2 digits of the year” setting mode ( display).

  • Page 13: Function Setting

    6. FUNCTION SETTING The captureboard includes such advanced functions as the Erase Reminder function that can be set directly using the operation buttons on the captureboard. The advanced functions can also be set from the function settings in the "TOOLBOX" menu installed in a computer (See the separate "Software Operation Manual".) 6-1.

  • Page 14: Modes And Lamp Statuses

    FUNCTION SETTING 6-2. Table of Function Numbers, Selected Modes and Lamp Status When at step 2 under “Basic Setting Operations” on the previous page, display the number of the function you want to set on the display window. At step 3, check whether the lamps are lit or off as indicated for the desired mode. Function number Selected Density...

  • Page 15: Factory Defaults

    FUNCTION SETTING 6-3. Factory Defaults The "Settings" menu of the "PLUS TOOLBOX" software in the included CD-ROM can be used to change the copyboard's settings. For setting instructions, see the separate "Software Operating Instructions". Below are the setting items and factory defaults.
  • Page 16 FUNCTION SETTING [Program updating during use of USB memory] Equipment required (including software) • Program file for C-12 • USB memory 1. Save a program (c12_01_00) in the route of USB memory. 2. Press the “Power” button of the C-12 main set to turn on the power and insert the USB memory into the USB memory port.

  • Page 17: Installation Of The Software

    7. INSTALLATION OF THE SOFTWARE When “Install Software” on the included CD-ROM’s menu is clicked, the “PLUS TOOLBOX”, TWAIN driver and USB driver are installed. 7-1. Check Prior to Installation 1. Check whether your personal computer satisfies the operating environment.
  • Page 18 Installing the USB Driver The USB driver is installed in the computer with the installer, but this does not complete association with the USB port. In order to use PLUS TOOLBOX, install using the procedure described below with the Captureboard con- nected.

  • Page 19: Uninstallation Of The Captureboard Soft

    Double click “Add or Remove Programs or Applications” (this will differ depending on the OS) to display the “Add or Remove Programs Properties” screen. Select PLUS TOOLBOX from among the list displayed and click [Change / Remove] to display the Add or Remove wizard screen.

  • Page 20: Test And Adjustment Functions

    8. TEST AND ADJUSTMENT FUNCTIONS 8-1. Test and Adjustment Functions The specifications for inspection and the calibration program are described below. 1) Seven-segment display specifications. Indicates an error occurring in the test mode. (Lights : Error) Progress number in the test mode Indicates the whole test mode.

  • Page 21: Names And Functions Of The Menu And

    Disable Note: Original Image Enable Enable Match Paper Size To set the “Security” settings, contact you nearest Color Moder Restrication PLUS Vision sales office, dealer or store. Disable Enable Setup Default Hardware Setup: Set the Captureboard’s operating environment here. Close...
  • Page 22 NAMES AND FUNCTIONS OF THE MENU AND THE SUPERIMPOSED IMAGE DISPLAY SCREEN Capture Settings: These settings are used when creating superimposed Setup images. See page E-18. Hardware Setup capture Setup Header/Fooder Copyboard Firmware Update Security ① Select image for projection: Selects the number of the monitor that is connected to Select image for projection the projector.

  • Page 23: Superimposed Image Display Screen

    NAMES AND FUNCTIONS OF THE MENU AND THE SUPERIMPOSED IMAGE DISPLAY SCREEN 9-2. Superimposed Image Display Screen The superimposed image display screen is displayed when “Yes” is clicked on the “SCAN” button and screen and the hand written and drawn image of the sheet surface is captured by the personal computer. ①...

  • Page 24: Superimposing Captured Images

    NAMES AND FUNCTIONS OF THE MENU AND THE SUPERIMPOSED IMAGE DISPLAY SCREEN 9-3. Superimposing captured images Project the image of the personal computer from the projector ① Operate the personal computer and prepare the documents that will be projected with the projector. ②...
  • Page 25 “PLUS TOOLBOX” is installed using a USB cable. The “PLUS TOOLBOX” main menu appears on the CaptureBoard C-12W computer’s screen. * PLUS TOOLBOX is resident in the system tray. The main menu appears automatically when the computer is con- nected to the captureboard. Settings...
  • Page 26 NAMES AND FUNCTIONS OF THE MENU AND THE SUPERIMPOSED IMAGE DISPLAY SCREEN Click the (Scan) Button of the Menu V2.0 Displays “The Projection Image Superimposed” screen. Obtain annotated images? Yes(Y) No(N) CaptureBoard C-12W Click “Yes” Preview Fil(F) The sheet surface of the captureboard will be scrolled, the capture will start and be completed.
  • Page 27 TWAIN compatible application software, below error Settings Show message may pop up. Exit In this case, right-click the PLUS TOOLBOX icon on the task CAPS 17:20 bar to quit the program and start capturing procedure using KANA other TWAIN compatible software.

  • Page 28: Fine Adjustment Of The Captured Image

    NAMES AND FUNCTIONS OF THE MENU AND THE SUPERIMPOSED IMAGE DISPLAY SCREEN 9-4. Fine Adjustment of the Captured Image When the positions of the projection image and the Captureboard image (such as writings and drawn on the board surface) differ on the Superimposed Image Display Screen, this function changes the position or size of the personal computer capture image on the Superimposed Image Display Screen.

  • Page 29: Settings

    ADJUSTMENT AND SETTINGS 9-5. Settings These settings perform the selection of the monitor that is connected to the projector and the selection of the O mark color used for position detection. Setting 1. Click the (Settings) Icon of the Menu Select image for projection The settings screen will open.

  • Page 30: Hardware Setup

    Use this procedure to set the captureboard's operating environment from the computer. The factory defaults are Shown below. Turn on the captureboard’s power, start up the com- V2.0 puter, then make the USB connections. The “PLUS TOOLBOX” main menu appears on the computer. CaptureBoard C-12W Click the “Setup” button. V2.0 The “Hardware Setup”...
  • Page 31 Read current Date and Time By factory default, the time is set to Japan Standard Time. PLUS TOOLBOX uses a 24-hour time display. Click to [ ] return, to [ ] advance. 1. When the hours (18 in this example) in the time section is clicked, a gray cursor is displayed over the hours.
  • Page 32 ADJUSTMENT AND SETTINGS Scan Data Resolution This is the selection of the resolution of the images saved in USB memory, and the transfer images when there is a PC connection. Standard: Vertical and horizontal dimensions of the read image will be one-half size. This will be one-quarter the amount of image data as compared to the selection of High Resolution.

  • Page 33: Trouble Shooting

    10. TROUBLE SHOOTING By checking operations normal usage time, it is possible to carry out judgments on malfunction to a certain extent. Carry out the following checks before disassembling the equipment. 1. Press the ON/Standby button and turn on the power. Is the power turned on? •...

  • Page 34: Disassembly And Assembly

    11. DISASSEMBLY AND ASSEMBLY 11-1. Tools Required • Phillips screwdriver (+) No. 2 • Cutting pliers • Locking tie (Cable tie) 11-2.Caution • See “1. Compliance of Safety Repair and Safety Inspection” before disassembling and assembling. • Put on gloves so that you do not cut your hand at the sharp edge of a frame during disassembly and assem- bly.

  • Page 35: 11-4.Disassembly And Assembly

    DISASSEMBLY AND ASSEMBLY 11-4.Disassembly and Assembly This section describes one example of disassembly and assembly procedures. For the actual operation, disas- semble and assemble the required parts with reference to “11-3. Disassembly and Assembly Procedures”. 1) Remove the Back Panel. (See Figs. 1 and 2.) 1.
  • Page 36 DISASSEMBLY AND ASSEMBLY 3) Remove the CCD Unit. (See Fig. 5.) 1. Remove the “S-3” screws shown in Fig. 5. 2. Remove the “S-4” screws shown in Fig. 5 and then remove the CCD Unit. Note: The CCD Unit requires adjustment when it is replaced and removed.
  • Page 37 DISASSEMBLY AND ASSEMBLY 4) Remove the Frame Cover Section. (See Fig. 6.) 1. Remove the “S-2” and “S-9” screws shown in Fig. 6. Cap L Cap R Cap R Cap L Fig. 6 5) Remove the Switch Box Unit. (See Fig. 7.) 1.
  • Page 38 DISASSEMBLY AND ASSEMBLY 6) Disassemble the Frame Cover Section. (See Fig. 9.) Remove the “S-1”, “S-2” , “S-6” and “S-11” screws shown in Fig. 9 and disassemble the Frame Cover. S-20 Cover Plate Upper Plate Frame Cover Upper Upper Plate S-20 Frame Cover Side L Cover Plate...
  • Page 39 DISASSEMBLY AND ASSEMBLY 9) Remove the Sensor Board Unit. (See Fig. 12.) 1. Remove the “S-3” screws shown in Fig. 12 and then remove the Sensor Board Unit. Note: Be careful not to damage the White Sheet when the Sensor Board Unit removed and installed. Sensor Board Unit Fig.

  • Page 40: Connection To The Set

    12. CONNECTION TO THE SET After connecting the main unit and printer, place the AC power adapters in the AC adapter box. • Flow of connection operations Step 1 Step 2 Step 3 Mounting the AC adapter Connecting the main Wiring the cables in unit and printer box to the printer table...

  • Page 41: Mounting The Ac Adapter Box To The Printer Table

    CONNECTION TO THE SET 12-2. Mounting the AC adapter box to the printer table After placing the AC power adapters of the main unit and printer in the AC adapter box, mount the AC adapter box to the printer table. WARNING •...

  • Page 42: Wiring The Cables In The Cable Cover

    CONNECTION TO THE SET 12-3. Wiring the cables in the cable cover(s) The place of installation of the cable covers included with the main unit differs for the standard type and wide type. (Note that they cannot be attached to the stand.) Also, the cable cover included with the stand and de- signed specifically for the stand cannot be attached to the main unit.
  • Page 43 CONNECTION TO THE SET Example of connection cable wiring Standard type + stand installation Back surface Cable cover specifically for the main unit. Cable cover specifically for the main unit. Wall power outlet Cable cover (Accessory for stand kit) AC power adapter's power plug Wide type + stand installation Back surface Cable cover specifically...

  • Page 44: Adjustment

    13. ADJUSTMENT 13-1. CCD Adjustment Tools Required • Phillips screwdriver (+) No.2 • Oscilloscope • C-11 Calibration Scale Adjustment is required in the following cases. (Calibration operation is also required after adjustment.) • When a CCD Board Assy is replaced •...
  • Page 45 ADJUSTMENT 1) Shift the rear panel to the right side (LED side) so that the Main Board Assy can be viewed. * At that time, put a Back Panel completely to the end of the main board Assy so that the outer light does not influence the CCD waveform.
  • Page 46 ADJUSTMENT 4) Put the set into the CCD adjustment mode. Turn OFF the POWER. • Turn ON the ON/Standby button while pressing and holding the “+” and “-” buttons, so the LED display is “AP”. • Press the “Reprint” button, so the set is put into the CCD adjustment mode. (LED display is “6”.) •...
  • Page 47 ADJUSTMENT 6) CCD monitoring angle adjustment Turn the CCD position adjustment screws (see Figure 7.) so that the waveform on the oscilloscope is symmet- ric on the right and left and so that the three vertical lines at the upper, middle, and lower positions can be read in the same level.
  • Page 48 ADJUSTMENT 7) Focus adjustment Move the sheet so that an adjustment pattern is displayed on the oscilloscope. Move the sheet so that three horizontal adjustment patterns are displayed on the oscilloscope. Monitor the display on the oscilloscope and move the lens so that the displayed waveform is sharp. Adjust the focus and fix the lens fixing screws (see Figure 4).

  • Page 49: Calibration Procedure

    ADJUSTMENT 13-2. Calibration Procedure Preparation ① C-11 Calibration Scale ② Dedicated board marker (black) 1) Write a calibration pattern. (See Figure 11.) Clean the sheet (on two planes) before performing calibration, and be sure to return the back panel to the prescribed position.
  • Page 50 ADJUSTMENT 100mm Sheet O hole Fig. 13 Calibration Pattern 2) Start calibration. • Press the ON/Standby button and turn off the power. • Turn ON the ON/Standby button while pressing and holding the “+” and “-” keys. • LED display is “AP”. •...

  • Page 51: Tension Adjustment Of Timing Belt

    ADJUSTMENT 13-3. Tension Adjustment of Timing Belt The tension of a timing belt must be adjusted when the Sheet Motor Assy is replaced and removed. Tool required • Spring balance Adjustment (See the illustration shown below.) • Fix the Sheet Motor Assy tentatively and measure the tension of a timing belt using a spring balance. •...

  • Page 52: Cable And Cable Connection

    14. CABLE AND CABLE CONNECTION LED Unit LED5 LED2 LED3 LED2 LED1 12pin CCD Board Assy Sensor Sheet Motor Assy Board Unit 5pin 22pin 6pin Main Board Assy Board Assy CN12 CN10 USB Function AC Plug USB Host USB Host Adapter printer memory...

  • Page 53: Parts List

    11. PARTS LIST 1. Overall configuration...
  • Page 54 PARTS LIST 1. Overall configuration PARTS No. PARTS NAME Q’ ty REMARK Frame Cover Sheet Unit Board Unit Cap L 723122100 723122100 Cap R 723122200 723122200 Back Panel Corner Back Panel (S) 301101 Back Panel (W) 301102...

  • Page 55: Frame Cover Section

    PARTS LIST 2. Frame Cover Section S-11 S-11 S-10...
  • Page 56 PARTS LIST 2. Frame Cover Section PARTS No. PARTS NAME Q’ ty REMARK Frame Cover UNIT (S) 301203 Frame Cover UNIT (W) 301204 Frame Cover Upper (S) Frame Cover Upper (W) Frame Cover Side L Frame Cover Side R Frame Cover Lower Unit (S) Frame Cover Lower Unit (W) Cover L 723120700...

  • Page 57: Sheet Frame Section

    PARTS LIST 3. Sheet Frame Section...
  • Page 58 PARTS LIST 3. Sheet Frame Section PARTS No. PARTS NAME Q’ ty REMARK Endless Sheet C-12S 301201 Endless Sheet C-12W 301202 Sheet Frame C-12S Sheet Frame C-12W Sheet Frame Unit C-12S 301209 Sheet Frame Unit C-12W 301210 Motor Harness (S) 715257800 Motor Harness (W) 715258300...

  • Page 59: Board Frame Section

    PARTS LIST 4. Board Frame Section 4. Board Frame Section PARTS No. PARTS NAME Q’ ty REMARK Board Frame Unit (S) No Parts Supply Board Frame Unit (W) No Parts Supply LED Unit 301109 301109 CCD Unit 715090013 715090013 Main Board Assy C-12 723511500 723511500 CCD Harness...

  • Page 60: Accessories Section

    PARTS LIST 5. Accessories Section...
  • Page 61 PARTS LIST 5. Accessories Section PARTS No. PARTS NAME Q’ ty REMARK Operation Manual C-12 (J) Japan Only Operation Manual C-12 (O/S) 723461400 723461400 Assembly Manual C-12 (J) Japan Only Assembly Manual C-12 (O/S) 723460400 723460400 Quick Guide C-12 (J) Japan Only Quick Guide C-12 (O/S) 723461600...

  • Page 62: Carton & Packing

    PARTS LIST 6. Carton & Packing...
  • Page 63 PARTS LIST 6. Carton & Packing PARTS No. PARTS NAME Q’ ty REMARK Carton UNIT M-12S 301205 Carton UNIT M-12W 301206 Carton Upper M-12S Carton Upper M-12W Carton Lower M-12S Carton Lower M-12W Corner Packing Upper (L) Corner Packing Lower (L) Corner Packing Upper (R) Corner Packing Lower (R) Accessory Box...

  • Page 64: M-11-T

    PARTS LIST 7. M-12-T T-10 S-12 S-13 T-10 T-14 T-10 S-14 S-12 S-13 S-14 T-14 S-12 T-10 S-13 T-14 T-13 S-14 S-12 S-13 T-15 S-14 T-14 T-10 T-11 T-12...
  • Page 65 PARTS LIST 7. M-12-T PARTS No. PARTS NAME Q’ ty REMARK T-Shaped Stand Assy No Parts Supply Side Bar Assy No Parts Supply Pipe Frame Cap 723321200 723321200 Front Caster 714660400 714660400 Back Caster 714660500 714660500 Carton UNIT (Stand) 301207 301207 Carton Upper (Stand) Carton Lower (Stand)

  • Page 66: Screws & Washers

    PARTS LIST 8. Screws & Washers PARTS No. PARTS NAME Q’ ty REMARK S-1 M4-8 Cross Recessed Binding Head 951240850 951240850 M4-8 Cross Recessed Binding Head 961540850 961540850 (Low Profile) S-3 M3-8 Cross Recessed 3-Point Type 952530810 952530810 S-4 M3-25 Cross Recessed 3-Point Type 952532510 952532510 M3-6 P-Tight Cross Recessed...

  • Page 67: Revision History

    16. REVISION HISTORY Revision History Revision page Date...

This manual is also suitable for:

Captureboard c-12wM-12sM-12w

Table of Contents