1. Manuals
  2. Brands
  3. Salini Manuals
  4. Hob
  5. SCC-4602B
  6. User instruction manual

Salini SCC-4602B User Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CONTENTS
IMPORTANT:
This User Instruction Manual contains important information, including safety & installation
points, which will enable you to get the most out of your appliance. Please keep it in a safe
place so that it is easily available for future reference; for you or any person not familiar
with the operation of the appliance.
-1-
2-4
5
6-9
10-13
14-15
16
17

Advertisement

Table of Contents
loading

Related Manuals for Salini SCC-4602B

Summary of Contents for Salini SCC-4602B

  • Page 1: Table Of Contents

    CONTENTS Important safety information Description of the appliance Using your appliance Installation 10-13 Cleaning and Maintenance 14-15 Technical data Declaration of conformity IMPORTANT: This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference;...

  • Page 2: Important Safety Information

    IMPORTANT SAFETY INFORMATION WARNING! Do not use or attempt to install this appliance until you have read this instruction manual. This appliance is intended for household use only. General Information  This appliance is designed for domestic household use and designed be built into a standard kitchen benchtop.
  • Page 3  The positions where the heat will radiate from are clearly marked on the hob top. The saucepans must be positioned exactly on these zones for efficient heating to occur. Pans should have the same diameter as the cooking zone that they are being used on. ...

  • Page 4: Child Safety

    Electrical Caution CAUTION! Cleaning operations must only be carried out when the cooktop is cool and disconnected from the power supply.  Any work on electric equipment and systems may only be carried out by authorized qualified persons.  In case of any damage, switch off the appliance and disconnect it from the power supply ...

  • Page 5: Description Of The Appliance

    （kW） SCC-4602B Note：1.2 kW hyperspeed zones (diameter 165 mm)；1.7 kW hyperspeed zones (inside diameter 140 mm，outside diameter 200 mm) ；1.8 kW hyperspeed zones (diameter 200 mm)；2.0 kW hyperspeed zones (diameter 165 mm， long 270mm) ；2.2 kW hyperspeed zones (inside diameter 160 mm，outside diameter 230 mm).

  • Page 6: Using Your Appliance

    USING YOUR APPLIANCE Before first use The first time you use your appliance, you will find that the appliance will omit a ‘new appliance’ smell. We suggest removing the new appliance smell by heating your appliance up to clear out any smells before use.

  • Page 7: Switching On A Zone And Setting A Power Level

    Switching on a zone and setting a power level NOTE: A zone must be selected within 1 minute of switching the hob on.  Press the cooking zone plus button (1) - (4) of the zone that you want to use. ...

  • Page 8: Residual Heat Indicator

    Residual heat indicator  After a zone is switched off, the corresponding cooking zone indicator (10) or (11), (12), (13) will show a flashing letter “H”. This means that the temperature of the zone is over 60°C and is therefore still high enough to cause injury. ...
  • Page 9 Setting a countdown time The hob timer can be used as a minute minder at any time without affecting the cooking process or power setting.  To set a minute minder countdown, press the timer button, use the plus (9) or minus (5) button so the timer display shows “- -“.

  • Page 10: Installation

    INSTALLATION The installation must be carried out by a suitably qualified person, in compliance with local electrical and building rules and specifications, and the instructions outlined in this manual. Installing the ceramic hob  Ensure that the appliance is installed in a suitable position, in consideration to adjacent walls, cupboards and protection for combustible materials in accordance with local rules.
  • Page 11 Assembly of ceramic hob Make an opening with the dimensions given in the diagram (560mm x 490mm) for the hob  to be mounted on the benchtop.  Check seal for perfect fit and overall cover. There is an overhang of 10mm around the cooktop.
  • Page 12 Model 220-240 1N～ 380-415 2N～ KADO K 1/5 50-60Hz 50-60Hz SCC-4602B H05VV-F 3G2.5 H05VV-F 4G2.5  The cable connections must be in accordance with the diagram located on the bottom of the hob.  You should use a good quality screwdriver to carefully, fully tighten ALL of the terminal screws.

  • Page 13: Replacing The Mains Supply Cable

    appliance. It should not be located above the appliance and no more than 1.25m away from it.  The cable can be looped if necessary, but make sure that is not kinked or trapped when the hob is in position. Care must be taken to avoid the cable being in contact with hot parts of the appliance.

  • Page 14: Cleaning And Maintenance

    CLEANING AND MAINTENANCE CAUTION! Cleaning operations must only be carried out when the hob is cool. The appliance should be disconnected from the power supply before commencing any cleaning process. Cleaning the ceramic hob top Any residues that are left on the hob top surface from cleaning agents will damage it. You should remove any residues with warm water mixed with a little washing up liquid.
  • Page 15 IMPORTANT: If your appliance appears not to be operating correctly, please make contact with the dealer. DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF! Please note that if an engineer is asked to attend whilst the product is under guarantee and finds that the problem is not the result of an appliance fault, then you may be liable for the cost of the call out charge.

  • Page 16: Technical Data

    Max Rated Mains Supply (double pole switched fused Inputs: Lead: outlet with 3mm contact gap) 3 core x 2.5 mm² or 400V / 220-240V Vac SCC-4602B 27.3 A 6.0 kW 4 core x 2.5 mm² 50-60 Hz (not supplied) -16-...

  • Page 17: Declaration Of Conformity

    DECLARATION OF CONFORMITY Australian Standards This product has been designed and manufactured to comply with all relevant Australian and New Zealand Standards. AS/NZS 60335.1 General Requirements for Domestic Electrical Appliances AS/NZS 60335.2.6 Specific Requirements for Domestic Electrical Cooking Appliances This appliance is SAA certified Installation of the appliance must be only be undertaken by a licenced electrician who can provide a compliance certificate.

Table of Contents