Summary of Contents for Care & Independence Adult TIS Shower Chair
-
Page 1: Tilt In Space
Tilt In Space Chairs and Cradles Model Number Description Safe Working Load Serial Number Tel: +44 (0)1869 327 999... - Page 2 Tilt In Space Chair/Cradle User Guide Safe Working Load (SWL) All of our standard Chairs are designed and tested to meet the requirements of the stated Safe Working Load. Description 900/2 Stainless Steel Tilt In Space Shower Cradle 150kgs 900/P/2 Stainless Steel Paediatric Tilt In Space Shower Cradle 150kgs 900/IN...
- Page 3 Recline Operation The tilting mechanism is operated via a full width bar located below the push handle. 1 - To release the mechanism pull the operating bar upwards. 2 - Holding the operating bar and handle push down until the desired recline angle is achieved.
- Page 4 Headrest Adjustment 1 - Release the finger screws at the top of the backrest and insert the headrest down-tubes. 2 - Select the desired headrest height by sliding the headrest assembly up or down. 3 - Secure the finger screws. 4 - The headrest mesh is secured and adjusted with hook and loop fastenings.
- Page 5 When removing the seat for maintenance or cleaning we suggest that you note the dimensions of the aperture and gap at the front of the chair to ensure it is re- fitted in the correct position. The seat is adjustable in width to allow improved posture and comfort. Ensure that the seat is set correctly for the Service User.
- Page 6 Mesh Adjustment Dependant on the need of the service user, the tension on the individual webbing straps can be increased or decreased to provide a more rigid or looser level of support. This can be achieved by using the adjuster on the male side of the side- pinch buckles.
- Page 7 Warranty We are pleased to offer a standard warranty of 15 years on stainless steel frames, (2 years on all other components), from the date of invoice. It is subject to the following general terms and conditions: A - Should problems be experienced with any workmanship or materials within the first 15 years on the stainless steel frame, (and the first 2 years on all other components), please contact your point of purchase or Aidservice Ltd.
- Page 8 Manufactured By Care & Independence Ltd 10 Dobson Park Estate Dobson Park Way, Ince Wigan, Lancashire WN2 2DX Tel: 01869 327999 Email: service@careandindependence.com www.careandindependence.com EU93-42...