USER GUIDE Range COMFORT VALUE Tilt-in-Space (CVTIS) 11-10-19 ISSUE DATE UG/CVTIS-01 VERSION APPROVED STATUS : Technical Director AUTHORISED BY CONTENTS Application ……………………………………………….. K.YOUNG Safety Chair Inspection (SWL) Instructions For Using Your Chair Caring For Your Chair Decontamination and Infection Control CE Declaration of Conformity This User Guide has been issued by Care &...
USER GUIDE: Tilt-in-Space COMFORT VALUE (CVTIS) 1. A PPLICATION TIS chair is designed to be used as attendant operated. COMFORT VALUE NOTE: The standard CVTIS chair is only supplied in one configuration, with the option of additional parts being purchased separately.
Page 3
USER GUIDE: Tilt-in-Space COMFORT VALUE (CVTIS) 5.6 To Replace the Arm or Adjust the Resistance i. Remove the outer black plastic cap – 2 x posi pan screws ii. Remove or tighten the nyloc nut depending on the task iii. Tightening will increase the resistance required to fold the arm iv.
USER GUIDE: Tilt-in-Space COMFORT VALUE (CVTIS) 5.11 Accessories 5.11.1 Commode pan The commode pan is mounted on a bracket under the seat. The commode pan rack is bolted to the support plate. Fitting the rack: i. Align the holes in the rack with the slots in the support plate ii.
USER GUIDE: Tilt-in-Space COMFORT VALUE (CVTIS) DECONTAMINATION AND INFECTION CONTROL In multi-user situations, please be aware of any infection control policies that may be in force or appropriate. CE DECLARATION OF CONFORMITY The CVTIS chair is designed by and manufactured for Care & Independence Ltd. Care & Independence are a UK manufacturer registered with MHRA as a Class 1 Medical Device Manufacturer and meet the essential requirements set out in Annex 1 of the Medical Device Directive 93/42EEC.