Care & Independence Adult TIS Shower Chair Operator's Manual page 2

Safe Working Load (SWL)
All of our standard Chairs are designed and tested to meet the requirements of
the stated Safe Working Load.
Ref Description
900/2 Stainless Steel Tilt In Space Shower Cradle
900/P/2 Stainless Steel Paediatric Tilt In Space Shower Cradle
900/IN Stainless Steel Tilt In Space Infant Shower Cradle
981/2 Stainless Steel Tilt In Space Shower Chair
981/2/P Stainless Steel Tilt In Space Paediatric Shower Chair
981/IN Stainless Steel Tilt In Space Infant Chair
981/TIS/PVC Stainless Steel Wipe Clean Tilt In Space Chair
981/TIS/B Stainless Steel Bariatric Tilt In Space Chair
Seat Height Adjustment
Please Note: Height adjustment can only be achieved when the Chair is
not in use.
1 - Remove the pin clip from the leg.
2 - Select the desired seat height by sliding out the leg from the frame.
3 - Refit pin clip.
4 - Repeat the adjustment for the other legs.
Brake Operation
Chairs are fitted with braked castors (identified by a red pedal). This is a foot-
operated brake. (Bariatric Chair brakes are stainless steel).
1 - Press down with the ball of the foot onto the front of the pedal to operate the
brake.
2 - Push back on the pedal to release.
Tilt In Space Chair/Cradle User Guide
SWL
150kgs
150kgs
100kgs
150kgs
150kgs
100kgs
150kgs
200kgs
CIMAN009 – Issue 1