Panasonic Lumix DC-G9 Operating Instructions Manual page 97

Turning on/off the camera with a smartphone
Wireless connectivity required:
The function allows you to view images on the camera placed in your bag, or turn on the
camera left in a separate place only when you record images with it.
1
Make a Bluetooth connection to the smartphone. (P92)
2
Select the camera's menu.
>
MENU
3
Set the camera on/off switch to [OFF].
4
On the smartphone, start up the "Image App", and set the Bluetooth function to
a state in which a connection can be made (standby state).
5
Operate the smartphone.
1 Select [
2 Select [Remote operation].
• The camera automatically turns on, allowing it to make a Wi-Fi connection automatically.
– (iOS devices) Depending on the connection status of the smartphone, you may need to
change the connected device on the Wi-Fi setup screen. Follow the on-screen message
on the smartphone to change the setting.
∫ Turning off the camera with the smartphone
1 Select [
2 Select [
• When [Remote Wakeup] is set to [ON], the Bluetooth function continues to operate even after
the camera is turned off, thus causing the battery to drain.
Taking images via a smartphone/tablet (remote recording)
Wireless connectivity required:
1
Connect to a smartphone. (P92)
2
Operate the smartphone.
1 (When connected via Bluetooth) Select [
2 (When connected via Bluetooth) Select [Remote
operation].
• Make a Wi-Fi connection automatically. (iOS devices) If you need to change the
connected device on the Wi-Fi setup screen, follow the on-screen message to change
the setting.
3 Select [
4 Record an image.
• The recorded images are saved in the camera.
• Some settings are not available.
Bluetooth
[Setup] > [Bluetooth] > [Remote Wakeup] > [ON]
].
].
OFF].
Wi-Fi
].
Wi-Fi
].

A


Wi-Fi/Bluetooth
97
(ENG) DVQX1333