Panasonic Lumix DC-G9 Operating Instructions Manual page 83

[Economy]
The camera can be set up to prevent unnecessary battery consumption.
> [Setup] > [Economy]
MENU
[Sleep Mode]
[Sleep Mode(Wi-
Fi)]
[Auto LVF/
Monitor Off]
[Power Save LVF
Shooting]
• To cancel [Sleep Mode], [Sleep Mode(Wi-Fi)] or [Power Save LVF Shooting], perform either of
the following operations:
– Press the shutter button halfway.
– Turn off and on the camera.
• To turn the monitor/viewfinder on again, press any button.
[Night Mode]
This displays the monitor and the viewfinder screens in red. It reduces the glare on the
screens when recording in low-light environment such as at night.
> [Setup] > [Night Mode]
MENU
1 Press 3/4/2/1 to select [ON] for the red display setting of the monitor or viewfinder
(LVF).
2 Press [DISP.] to display the brightness adjustment screen.
3 Press 2/1 to adjust the brightness, and press [MENU/SET].
The camera is automatically turned off if the camera has not been used for
the time selected on the setting.
The camera is automatically turned off if it is not connected to a Wi-Fi
network and has not been used for 15 minutes (approx.).
The monitor/viewfinder is automatically turned off if the camera has not
been used for the time selected on the setting.
If you display the monitor using the viewfinder/monitor automatic switching
function, the camera will turn off automatically after being left idle.
Sets the amount of time before the camera turns off
[Time] automatically.
[10SEC]/[5SEC]/[3SEC]/[2SEC]/[1SEC]/[OFF]
Sets whether to turn off the camera automatically only while
[Display] the [Monitor Info. Disp.] screen is displayed or while any
screen is displayed.
Menu
83
(ENG) DVQX1333