Safety Instructions - Odys Slim TV 10 Manual

1 Safety instructions

Thank you for choosing our product. Please read this manual carefully and observe all
safety and operating instructions. Store the manual in a safe place for later reference.
The flash symbol displayed in a triangle warns the user of dangerous electrical
voltages inside the device that could lead to electrical shocks with harmful effects
to health if the device is used incorrectly.
The exclamation point displayed in a triangle in the documentation
indicates dangers when using and maintaining the device.
or
The information symbol in the documentation indicates useful information and tips
for using and maintaining the device.
Caution
Caution
The product contains a low-power laser device. In order to ensure the safety of the
laser device, do not remove any cover and attempt to repair the unit. If any service
is needed, please contact the distributor or its authorized service center.
To reduce the risk of electric shock, do not remove the cover (or back). No user-
serviceable parts inside. Refer servicing to qualified service personnel. Unplug the
product from the wall outlet before servicing or when it is unused for a long period
of time.
The manufacturer should not hold responsibility for the damage caused by any
substitutions and modifications of the product without authorization from the
manufacturer or authorized unit.
Power supply
Connect the power supply cable to the DC 12V IN jack on the right side of the
device. Connect the power plug to an earthed socket AC 100-240 V. If you have
problems when plugging the mains plug into the socket, rotate the plug by 180°
and plug it in again.
2
ODYS Slim TV 10
The device is a class 1 laser product. The corresponding label
is located on the rear side of the device. When the housing has
been opened and the lock is not engaged, visible laser radiation
can escape. Avoid looking into the laser beam by all means.