Filter Lifetime Counter Reset; Filter Type Change - Philips AC3259 User Manual

Filter lifetime counter
reset
After replacing a filter, you need to reset
the filter lifetime counter manually.
You can also replace filters even if there
is no filter replacement code displayed
on the screen.
1
Touch and
3 seconds to enter the filter force
reset mode (fig.€).
» Code (A3) of the NanoProtect
filter Series 3 displays on the
screen .
2
Touch and hold
force reset the filter lifetime of the
NanoProtect filter Series 3 (fig.).
3
Code (C7) of the Nanoprotect filter
AC displays on the screen after the
lifetime of the NanoProtect filter
Series 3 filter has been reset (fig.‚).
4
Touch and hold
force reset the filter lifetime of the
NanoProtect filter AC and exit the
filter force reset mode (fig.ƒ).

Filter type change

1
Touch and
3 seconds to enter the filter type
change mode (fig.€).
» Code (A3) of the NanoProtect
filter Series 3 displays on the
screen.
2
Touch to select the filter code of
the new filter you will use (fig.„).
3
Touch and hold
confirm the filter code of the new
filter (fig....).
12 EN
simultaneously for
for 3 seconds to
for 3 seconds to
simultaneously for
for 3 seconds to
Note
• After you have selected the filter code
of the new filter using the
if you do not touch any other buttons
in 10 seconds, the appliance will
automatically confirm the filter code of
the new filter.
4
Code (C7) of the Nanoprotect filter
AC displays on the screen after the
first filter type has been changed
(fig.‚).
5
Touch to select the new filter
code of the second filter (fig.†).
6
Touch and hold
to confirm the filter code of the
second filter and exit the filter type
change mode (fig.‡).
button,
for 3 seconds