Table of Contents
Advertisement
FIGURE 6
FRAME MOUNT
12
5.0 ELECTRIC L WIRING
Field wiring must comply with the National Electric Code (C.E.C. in Canada) and any
applicable local ordinance.
W RNING
Disconnect all power to unit before installing or servicing. More than one dis-
connect switch may be required to de-energize the equipment. Hazardous volt-
age can cause severe personal injury or death.
5.1 POWER WIRING
It is important that proper electrical power is available for connection to the unit model
being installed. See the unit nameplate, wiring diagram and electrical data in the installa-
tion instructions.
• If required, install a branch circuit disconnect of adequate size, located within sight of,
and readily accessible to the unit.
• IMPORTANT: After the Electric Heater is installed, units may be equipped with a cir-
cuit breaker. This circuit breaker protects the internal wiring in the event of a short cir-
cuit and serves as a disconnect. Circuit breakers installed within the unit do not pro-
Hide quick links:
Advertisement
Table of Contents
