Philips HB558 Manual page 17

Problem
Solarium does not switch on.
The power fuse switches the mains
power off when switching on or while
using the solarium.
The browning is not according to your
expectations.
However, it is also possible that the appliance has not been installed
according to the instructions or is used incorrectly.
If this is the case, you will be able to solve the problem immediately.
You may check the following section before contacting your dealer or a
Philips Customer Care Centre.
Possible cause
Mains plug is not in wall socket.
No mains power. (Please check with other appliance.)
Timer has not been set.
The lamp of the face tanner (HB558 only) is still too warm to restart. (Allow
the lamp to cool down for approx. 3 minutes)
Check the fuse to which the solarium has been connected.
The proper type for your solarium is a 13 A (for U.K.) or a 16 A (for other
countries) normal fuse or a slow reacting automatic fuse.
You followed a course which is not the most appropriate for your skin type.
The operational distance is larger than indicated.
After using for a long time the UV production of the lamps decreases.
(With normal use this will not be noticeable for years.)
You may compensate for this effect by selecting longer treatment times or
replace the sun lamps
ENGLISH
17