Call Transfer Feature; Second Handset Operation - Uniden TRUC46 User Manual

TRUC46_OM_B6 5/30/02 5:57 PM

Call Transfer Feature

You can transfer an outside call to the other handset.
To transfer a call (to the second handset)
1) Press
2) When the other handset receives the call, the transfer tone
To receive a transferred call (from the second handset)
Pick up a handset (when AutoTalk is set to On), or press
TALK/FLASH
answer the transferred call by pressing any number key, ✱
or

Second Handset Operation

Setting up
[ 42 ] E X PA N D I N G Y O U R P H O N E
Page 42
If you transfer the call and it is not picked up after 5 minutes,
the call will be disconnected.
during a call. The call will automatically be
DEL/TRANS
placed on hold and the transfer tone sounds.
stops. To cancel the transfer, press
DEL/TRANS
on the handset.
to answer the transferred call. Additionally, you can
(when AutoTalk is set to On).
#
Charging
Charge the second handset for 15-20 hours before using.
Dialing mode
Dialing mode is a universal setting. When the mode is changed on the original handset,
the setting for the second handset is changed as well.
or
TALK/FLASH
,
/TONE