Table of Contents
Advertisement
SRS-T77
2-3.
SPEAKER UNIT (SP1) (L ch)/(SP2) (R ch)
Note: It is not necessary to remove speaker unit (L ch) assy
to remove speaker unit (R ch) assy.
1 Remove two solders of lead
from speaker unit (SP1) (L ch).
5 speaker unit (L ch) assy
6 Remove two solders of lead
from speaker unit (SP2) (R ch).
2 two screws
3
(P2.6 × 6)
4 Remove "holder, rotary shaft"
8
in the direction of arrow A .
A
0 speaker unit (R ch) assy
B
9 Remove "holder, rotary shaft"
7 two screws
in the direction of arrow B .
(P2.6 × 6)
Note: It is not necessary to remove speaker unit (SP1) (L ch)
to remove speaker unit (SP2) (R ch).
qj four screws
qa four screws
(P2.6 × 6)
(P2.6 × 6)
qs cabinet (L), rear
qk cabinet (R), rear
qf four screws
ql absorbent, acoustic
(P2.6 × 6)
w; four screws
(P2.6 × 6)
qd absorbent, acoustic
qg speaker unit (SP1) (L ch)
wa speaker unit (SP2) (R ch)
qh cabinet (L) assy, front
ws cabinet (R) assy, front
4
Advertisement
Table of Contents
