Table of Contents
Advertisement
DIGITAL-LOGIC AG
Mass Storage
FD:
HD:
Standard AT Interfaces
Serial
Parallel
Keyboard
Mouse
Speaker
RTC
Backup current
Non-chargeable Battery
MSM800SEV/BEV/XEV
MSM800SEL/BEL/XEL
BUS
PC/104plus
Clock
USB
USB
Transfer rate
Channels
Peripheral Extension
ISA
PCI
Power Supply
Working
Power Rise Time
Power consumption
Standby power consumption MSM800SEV/SEL/BEV:
Physical Characteristics
Dimensions
Weight
PCB Thickness
PCB Layer
MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7
Floppy disk interface, for max. 1 floppy with 26pin connector
E-IDE interface, AT-type, for max. 2 hard disks, 44pin connector, for 1.3, 1.8
and 2.5" hard disks with 44 pins IDE
Name
FIFO
COM1
yes
COM2
yes
(Baud rates: 50-115 KBaud programmable)
LPT1 printer interface mode: SPP(output), EPP (bidir.) (Centronics)
AT or PS/2 –keyboard
PS/2
0.1 W output drive
Integrated into the chipset, RTC with CMOS-RAM 256Byte
<5 µA
3.6V Lithium 400mAh internally or externally connected
External 3.6V Lithium battery needed
IEEE-996 standard ISA bus, buffered
MSM800SEV/SEL:
MSM800BEV/BEL/XEV/XEL:
8MHz defined by the Geode
2.0
400MBps, 12.5MBps/1.5MBps
4
With PC/104 BUS
MSM800SEV/SEL:
MSM800BEV/BEL/XEV/XEL:
With PC/104plus BUS
MSM800SEV/SEL:
MSM800BEV/BEL/XEV/XEL:
5 Volts ± 5%
Unspecified
MSM800SEV V2.1 with HD, MS/KB (PS/2), CRT Monitor
Windows XP Desktop: type 7.5-10W
Windows Standby: 2.5W (without MS/KB wake-up function)
Windows Standby: 4.5W (with PS/2 wake-up function)
Length:
91mm
Depth:
96mm
Height:
25mm
170gr
1.6mm / 0.0625 inches nominal
Multilayer
17
IRQs
Addr.
IRQ4
3F8
IRQ3
2F8
8bit and limited 16bit support
full 16bit ISA support
with ISA 16bit DMA limitation
no ISA limitation
3 slots – max. 3 master devices
2 slots – max. 2 master devices
Standard
Option
RS232C
RS232C
Advertisement
Table of Contents
