Description Of Parts; Operating Instructions - Argo DROP Operating Instructions Manual

 After having duly filled the tank with water, plug the humidifier into the electric socket, checking that the voltage
supplied complies with the product requirements.
 Press the LIGHT key as described below:
- one time: the LED under the water tank changes colour,
- twice: the red LED under the tank lights,
- three times: the green LED under the tank lights,
- four times: the blue LED under the tank lights,
- five times: the LED under the tank turns OFF.
 Now enable steam production by using the dial on the front of the product.
 The dial allows you to adjust the quantity of steam you wish to release into the environment, from a minimum (MIN) to
a maximum (MAX). When set to OFF, the appliance does not produce steam.
 Once the quantity of humidity has been set, the warning light (17) turns green in order to indicate that the appliance is
humidifying.
 The appliance will continue to humidify at the intensity level selected until all water has been used up from the tank.
V 10/16

DESCRIPTION OF PARTS

OPERATING INSTRUCTIONS

1. Mist discharge nozzle
2. Water tank
3. Nozzle insertion position + handle
4. Front panel
5. Water inlet valve insertion
6. Ion exchange filter
7. Tank plug
8. Tank base
9. Brush
10. Nebuliser
11. Control panel
12. LIGHT button – choice of colour
(OFF, colour change, red, green,
blue)
13. Dial to adjust steam quantity:
MIN - low
MAX - high
OFF - no steam produced
14. Decorative insert
15. Plug
16. Air emission
17. Warning light:
- ON- in operation (green)
- OFF – empty tank (red)
18. Base
19. Filter
13