Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Vogue P640STX
Summary of Contents for Vogue P640STX
- Page 2 Content Safety instruction............2 Product description.............4 Installation..............6 Specification.............12 Maintenance and troubleshooting.......16 Model nunbers list: P640STX P640STG P750STG-1 P950STX P950STG P950STX-1 P950STG-1 NOTE: This User Instruction Manual contains important information, including safety&installation points, which will enable you to get the most out of your appliance.
-
Page 3: Troubleshooting
TROUBLESHOOTING This manual explains the proper installation and use of your appliance, please read it Servicing of the hotplates must only be done by an authorised service representative (see back of this booklet) and the carefully before using even if you are familiar with the product. The manual should be kept hotplate must not be modified. -
Page 4: Stainless Steel
Any hose assembly used must be restrained afety instructions Cleaning and maintenance should be carried out with from accidental contact with the flue outlet of an the appliance cold especially when cleaning the Safety when installation under bench oven. The hose is not to exceed enameled parts. - Page 5 Do not place anything, eg.flame tamer, asbestos mat, between pan and pan support as serious damage to the appliance may result. Model No. P640STX P640STG P750STG-1 Do not remove the pan support and enclose the burner with a wok P950STX stand as this will concentrate and deflect heat onto the hotplate.
-
Page 6: Technical Specifications
(h x w x d) mm ( w x d)mm power turn the gas control knob to the High Flame setting of the burner to be lit, while at the same time depressing the P640STX 118x600x520 560x480 11.5 Kgs 220-240V/50-60Hz gas control knob to activate the spark ignition. -
Page 7: Before Installation
Natural gas installation) are accessible for testing and/or adjustment with the hotplate in the installed position. TO BE INSTALLED ONLY BY AN AUTHORIZED PERSON. 1. Cupboard Cutting Bench top thickness, 30– 40 mm (3 – 4 cm). P640STX/P640STG P950STX/P950STG/ P950STX-1/P950STG-1 Description Explanation These show which zone is under control. -
Page 8: Natural Gas
Depending on the hotplate model, the burner choices are: The Triple Ring burner (diagrams below) does not fit over the igniter or thermocouple but must be placed on its supports. P640STX,P640STG: Auxiliary, Semi-Rapid x2, and Wok burners. P750STG-1,P950STX,P950STG,P950STX-1,P950STG-1: Auxiliary, Semi-Rapid x2, Rapid and Wok burners. - Page 9 3. Fit the Gas type label supplied with this kit next to the gas connection point and remove the existing label. Wiring diagram for P950STX/P950STX-1 Setting the minimum level Wiring diagram for P640STX/P640STG P950STG/P950STG-1/P750STG-1 1. Remove Panels, knobs and water dish. 4. Gas connection 2.
- Page 10 3. Fit the Gas type label supplied with this kit next to the gas For the Model P640STX, P640STG, P750STG-1, P950STX, P950STG, P950STX-1, connection point and remove the existing label. P950STG-1 , light Triple Ring and Auxiliary burner on and adjust test point pressure to 1.00 Setting the minimum level kPa.
Need help?
Do you have a question about the P640STX and is the answer not in the manual?
Questions and answers